Got new mugen engine mounts put in 2day. When i had them out i was having a play with them and they were more stiffer then the oem ones that had been pulled out. Shifting now feels smoother and car feels abit more responsive. 2 side mounts were easy to install but the front mount looked like a pain in the ass !
nice Steve! I'm still waiting for my Spoon mounts...hehehe
Was on the way home from work tonight when I started up my EP3 and the engine light came on and stayed on. That's quite worrying. I drove it all the way home... with the light remaining on the whole time. Knowing that the engine warning could have anything to do with the engine, is there anything I can look at to try and remove the engine light? E.g. Check spark plugs, missfire, etc... I'll need to have a look at it tomorrow or on the weekend.
I understand that there is an error code that the OBD diagonistics have picked up but I don't know what it is without any tools to help me diagnose it.
If its ""very small difference" how can you sit behind your PC & claim the EP3 "Shits"& im only quoting your own words, on the DC5'S, to me a comment like that tells me you dont know wtf your talking about and would probably be better of buying a pink convertible VW Bug to cruise your boyfriend around in!
Was on the way home from work tonight when I started up my EP3 and the engine light came on and stayed on. That's quite worrying. I drove it all the way home... with the light remaining on the whole time. Knowing that the engine warning could have anything to do with the engine, is there anything I can look at to try and remove the engine light? E.g. Check spark plugs, missfire, etc... I'll need to have a look at it tomorrow or on the weekend.
I understand that there is an error code that the OBD diagonistics have picked up but I don't know what it is without any tools to help me diagnose it.
Cheers.
Just reset the ecu by removing the fuse or disconnect the battery for a minute or so.
Just reset the ecu by removing the fuse or disconnect the battery for a minute or so.
Have you done any mods lately?
The car's fully stock. No mods at all. There must've been a reason why it came up in the first place which was what I was hoping to determine. I may try and DC the battery to reset the ECU on the weekend. If it pops up again, then there must be something wrong and I may need to do some more investigating.
The car's fully stock. No mods at all. There must've been a reason why it came up in the first place which was what I was hoping to determine. I may try and DC the battery to reset the ECU on the weekend. If it pops up again, then there must be something wrong and I may need to do some more investigating.
Cheers.
so is the engine light is off now??
have you been driving hard?? like you change gear at 8k plus?
Hmmm not sure if its 02 Sensor, but do you think following this guide would help locate the issue? http://www.ozhonda.com/forum/showthr...highlight=obd2
There's no mention if this method will work with the EP3 though.
Originally Posted by SuperSteve
Reply With Quote
Bookmarks