Results 1 to 10 of 10

Thread: Honda Head Unit

  1. #1
    Member Array
    Join Date
    Jun 2009
    Location
    St Albans
    Car:
    2000 Cxi EK

    Honda Head Unit

    hey guys, just wondering if anyone can confirm that in order to install an after market Head Unit, i have to remove the console, is that correct? So it's not a matter of removing the plastic bezel around the current unit? it's a 2000 CXi, thanks in advance

  2. #2
    Member Array
    Join Date
    Feb 2007
    Location
    SydN3Y
    Car:
    your mum
    you dont remove the black plastic surround with controls at all to change the headunit. you have to take off pretty much the whole bottom plastic trim. passenger/driver bottom trim, centre console, after removing it all you'll see how its mounted.
    Last edited by simonnowis; 01-07-2009 at 09:53 PM.

  3. #3
    Member Array
    Join Date
    Jun 2009
    Location
    St Albans
    Car:
    2000 Cxi EK
    bugger, that's what i thought, i remember seeing it in a how to guide, thanks for your help

  4. #4
    Member Array
    Join Date
    Aug 2005
    Location
    Melbourne
    Car:
    GE8

  5. #5
    Member Array
    Join Date
    Jun 2009
    Location
    St Albans
    Car:
    2000 Cxi EK
    Quote Originally Posted by twing View Post
    i followed that instructions, but one problem though, the stock unit has a metal bracket at the back, but my HU doesn't have holes for that, is there any other ways of mounting the HU?

  6. #6
    Member Array
    Join Date
    Aug 2005
    Location
    Melbourne
    Car:
    GE8
    You don't need the metal bracket. The head unit should come with a little rubber, to go with a screw. Then the screw goes to the back of the new head unit.

  7. #7
    Member Array
    Join Date
    Jun 2009
    Location
    St Albans
    Car:
    2000 Cxi EK
    Quote Originally Posted by twing View Post
    You don't need the metal bracket. The head unit should come with a little rubber, to go with a screw. Then the screw goes to the back of the new head unit.
    can you explain further? because the back plate gets bolted onto the chassis, what role would that little bolt do?

  8. #8
    Member Array
    Join Date
    Jun 2009
    Location
    St Albans
    Car:
    2000 Cxi EK
    one more question guys, i seem to have 2 extra cables, one being red with black stripe and the other being yellow with black stripe, anyone know what this is? on the install sheet, it didn't have these two cables

  9. #9
    Mounting most aftermarket headunits use the Universal Din Cage which looks like this:

    You put this into the slot, and bend some of the metal tabs in place behind your dash bezel so you get a solid mounting point.

  10. #10
    Quote Originally Posted by burner42 View Post
    bugger, that's what i thought, i remember seeing it in a how to guide, thanks for your help
    it takes around 5 to 10 mins if you know what to do.\

    edit: sorry, didn't read the rest of the thread.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.