|
-
Dash Light Fuse keeps blowing....
hey all,
not too sure if this is the section to put this,
I was just on my way home, as it was getting dark, turned my lights on and the back lights for the tacho, speedo, and aircon etc went off... checked the fuse and fair enough it was blown, so i changed it to a new one, turned them on and bam blew the fuse again, i then put a 15amp fuse in and it blew that aswell... anyone know why this is?
EDIT:
well the CD player still works perfectly fine so it cant be that?
Would it be the head lights or tail lights? as when the fuse has blown, the tail lights dont work or the parkers?
Last edited by VTi_b0i; 08-07-2009 at 03:49 PM.
Power Of Dreams...
VTECN
-
You have a short in your circuit supporting the things you mentioned, if the tacho is aftermarket, Id start at looking at that wiring.
-
 Originally Posted by markoJEK1
You have a short in your circuit supporting the things you mentioned, if the tacho is aftermarket, Id start at looking at that wiring.
Yeah check wiring for aftermarket guages first
-
there is a grounding issue
There is a ground on the steering column and check the ground where the deck goes
-
if i remember, the deck was still working... and i dont have any aftermarket guages etc? my head and tail lights are aftermarket but they still work lol but yeahh ill check the grounding for all mentioned 
thanks guys
Power Of Dreams...
VTECN
-
well the CD player still works perfectly fine so it cant be that?
Would it be the head lights or tail lights? as when the fuse has blown, the tail lights dont work or the parkers?
Power Of Dreams...
VTECN
-
what CD player do you have?
Check the Illumination (dimmer) wire is either hooked up properly, or taped or properly.
If you stand for nothing, you will fall for anything.
-
do the brake lights work?
pull your tail/brake light combo globes out & see if the short disappears
-
i have a JVC mp3 player... its still working perfectly fine tho...
ive discovered none of the parkers work, and when the lights are on, that little beep sound doesnt work either...
i will have a look 2morrow, i cant really check anything anymore as im all out of fuses
Power Of Dreams...
VTECN
-
so uve blown the brake light fuse as well???
chucking fuses at the problem,especially bigger ones then original, aint the best plan of attack....
$10 worth of multimeter is much better
go put your foot on the brake pedal & see if both brake lights come on
-
yeahh the brake lights work dude, and the headlights work but not the parkers, and the hi beam works aswell... just no tail lights when not braking
Power Of Dreams...
VTECN
-
 Originally Posted by VTi_b0i
yeahh the brake lights work dude, and the headlights work but not the parkers, and the hi beam works aswell... just no tail lights when not braking
dimmer wire.
Had the same problem, kept the fuse for dash and tail lights, they are the same fuse.
CHECK YOUR DIMMER WIRE. it was probably left un taped or poorly insulated when your HU was installed.
If you stand for nothing, you will fall for anything.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks