wow details on your car behtec junkie motor specs weight suspension setup etc! very close to 12's with b series?!
thanks man
my motor is stock internally i have a dc2r k&n airfilter and box with a diy piping and toda headers with 2.5inch exhaust, and have apexi n1 coilovers with a power fc tunned by joe from hi comp wid a best of 118.5 kw
i didnt get to weight it wish i could have
and thanks for all the comments guys
EFB18CR
backyard crx
13.206 @106mph 2.111 60ft street tread
12.688 @103mph 1.763 60ft full slicks
Shafts wont break unless you bog it. Dont be scare to give it some RPM's. Im sure yboost wont have that problem with high rpms launches and launch control
Shafts wont break unless you bog it. Dont be scare to give it some RPM's. Im sure yboost wont have that problem with high rpms launches and launch control
Enough said
High rpm launch will not kill the axles or CV joints as long as its done properly.
We did 7250 rpm launch on 24.5 inch slicks @ 7.5 psi on the slicks ( Still running OEM Honda DC5R axles for over 100 passes down the 1/4 mile)
this was my first nite out since i finished the setup so im still tryin to figure out my launching
13.2 i launched at 2500rpm stil big wheelspin
13.8 at 3500 and i thinks its too much so i half throttle it half way through 1st ( missshifted so time sucked)
13.5 was at 2700rpm i think this launch was gud but i misshifted
my tyre pressure was 20 to 21 was too lazy to drop it lol
and my tyres are dunlop full streets not semis
Originally Posted by iijjee
(and what's the cai secret - I'm sick of the radiator fan blowing straight at my K&N!!!)
thanks and btw there is none i jst have stock dc2 air box wid extra piping to make it breath easier lol
Last edited by Behtec_JunKIE; 06-07-2009 at 12:01 AM.
EFB18CR
backyard crx
13.206 @106mph 2.111 60ft street tread
12.688 @103mph 1.763 60ft full slicks
Can't wait to find out how much that crx weighs! My EG is 1050kg without driver - just weighed. Could prob get it to 990kg without seat and spare etc. My guess is that behtec is about 890kg plus driver!
Bookmarks