EP3 Type R

[i-vtec]

its easier to go double din again. should be a direct bolt on.

i got a 1 din and bought a din pocket from Honda for $50. it's for EU civic but the screws don't line up so i have to tape the sucker on.

same here, i got a din pocket from honda for $50 and same situation and got it taped down also.

[Perry]

wired I thought whole double din section is identical to the EU's

[Philip Lee]

wired I thought whole double din section is identical to the EU's

looks like identical but the holes don't line up to the din frame.

in fact it's very far off. maybe there are other parts but i want to finish it off on the day (its a sunday) as i need to drive the car on Monday so i just tape it around the frame.

i don't plan to put heavy stuff in there so it's ok. so far so good.

[EP3EVA]

looks like identical but the holes don't line up to the din frame.

in fact it's very far off. maybe there are other parts but i want to finish it off on the day (its a sunday) as i need to drive the car on Monday so i just tape it around the frame.

i don't plan to put heavy stuff in there so it's ok. so far so good.

c'mon guys share some pic's,....yeh sharing is caring

[KaZe86]

ohh got the injen cai in the ep3 finnaly took 2 hours or so was a bitch to put in had to cut stuff and drill stuff sigh... but end result totally worth it! you can hear the cross over so much now lols hopefully getting the headers in this weekend also thanks to my mate duy (g-stick) that helped heaps as usal!

[Philip Lee]

... but end result totally worth it! you can hear the cross over so much now lols ....

well done.

cutting trim was a bitch but the noise at vtec is very addictive.

[KaZe86]

well done.

cutting trim was a bitch but the noise at vtec is very addictive.

yeah the trim also that metal part near the battery we tried to drill out the spot weld place but couldent coz the drill was shit so we cut the ends off lols easier

[Philip Lee]

c'mon guys share some pic's,....yeh sharing is caring

you mean pic of the finished product or pic of the installation?

didn't take any pic during the installation but it looks similar to this (not my car but same din pocket):

[EP3EVA]

you mean pic of the finished product or pic of the installation?

didn't take any pic during the installation but it looks similar to this (not my car but same din pocket):

thanx for the pic!! even is no your car thanx for the idea!(nice carbon there)

yeah some time is nice to see what people up to there Godly EP3

[icecrm]

where do i get carbon interior bits

[sai_ANN]

^ they're OEM honda...expensive bits of sticker....was approx $150aud when i was asking about it a while ago

[EP3EVA]

Honda Civic Type R radio Adapter Din plate EP3 CD


http://cgi.ebay.com.au/Honda-Civic-T...7;3A1|294%3A50