Page 3 of 4 FirstFirst 1234 LastLast
Results 25 to 36 of 48
  1. #25
    Member Array
    Join Date
    Jun 2008
    Location
    Gold Coast,QLD
    Car:
    Eg Civic
    900km trip to syd should be a good test man
    "Wheels are like bosoms to men, and cars have four of them"

  2. #26
    Member Array
    Join Date
    Nov 2007
    Location
    Sydney
    Car:
    EP3R>AH>EK>DC2
    Very True
    SPAMMAPS
    Carburettor|Nation

    that mikey G guy is the biggest shit talker ive ever met..
    in the space of 15minutes he sold two sets of wheels. claims a guy under the username DNT-CRY bought them!

  3. #27
    Account Disabled Array
    Join Date
    Aug 2004
    Location
    Garage
    I like running 10-40w. I wouldnt spend more then $50 on 5L oil if you plan to change oil 5000km intervals.

  4. #28
    Member Array
    Join Date
    Sep 2007
    Location
    Sydney
    Car:
    DC2 Squared
    Quote Originally Posted by Benson View Post
    I like running 10-40w. I wouldnt spend more then $50 on 5L oil if you plan to change oil 5000km intervals.
    I agree with this man. Also 0w is too thin for a worn motor, regardless of grade quality.

  5. #29
    Member Array
    Join Date
    Jun 2008
    Location
    Gold Coast,QLD
    Car:
    Eg Civic
    Quote Originally Posted by Chr1s View Post
    I agree with this man. Also 0w is too thin for a worn motor, regardless of grade quality.
    hmm well hats what i got

    any negative effects?
    "Wheels are like bosoms to men, and cars have four of them"

  6. #30
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Quote Originally Posted by eg5civic View Post
    awesome, well as i said i'll change it and see if a knock appears, oil leaks ect

    0w-40 would be good for the track too? i might go Rp next i just wanted to try EDGE again as i'm comig to sydney to pick up some rims soon is all and didnt want to fork out big dollars for oil thats gonnna have 2000kms knocked off its life in a week or two
    Edge 0w-40 will protect your engine on track as long as your engine is in good condition and it is warmed up before you give it a hard run. But seeing that I don't know the condition of your engine, I can't guarantee that your engine will be fine.

    For the record, I have used both the Edge 5w-30 and 0w-40 on the track with no problems and no oil burning, but then again my engine has only 80,000 km and revs to only 7000rpm unlike yours.
    --------------------------------------
    Stocky CL9 - 1:17.2

  7. #31
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Quote Originally Posted by Chr1s View Post
    I agree with this man. Also 0w is too thin for a worn motor, regardless of grade quality.
    0w is the rating at -18 ºC. Show me where in QLD do you get -18 ºC. Also, 0w has the same viscosity as 5w. The only difference is the pour point, which is -30 ºC for 5w and about -36 to -40 ºC for 0w.

    Look at the 2nd number. It is a 40 weight oil at 100 ºC. It is thicker than FEO 10w-30 and Edge 5w-30 in QLD and engine temperature.
    --------------------------------------
    Stocky CL9 - 1:17.2

  8. #32
    Member Array
    Join Date
    Jun 2008
    Location
    Gold Coast,QLD
    Car:
    Eg Civic
    Quote Originally Posted by aaronng View Post
    Edge 0w-40 will protect your engine on track as long as your engine is in good condition and it is warmed up before you give it a hard run. But seeing that I don't know the condition of your engine, I can't guarantee that your engine will be fine.

    For the record, I have used both the Edge 5w-30 and 0w-40 on the track with no problems and no oil burning, but then again my engine has only 80,000 km and revs to only 7000rpm unlike yours.
    I assume its in good condition as it didnt chew any oil but then again it was running thick oil

    also they said it was low kays.. ie 80-100k apparently

    -____- so many choices in oils, just dont want to make the wrong one and harm the engine
    "Wheels are like bosoms to men, and cars have four of them"

  9. #33
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Quote Originally Posted by eg5civic View Post
    I assume its in good condition as it didnt chew any oil but then again it was running thick oil

    also they said it was low kays.. ie 80-100k apparently

    -____- so many choices in oils, just dont want to make the wrong one and harm the engine
    You can harm the engine by choosing the wrong viscosity, going too long in the oil change intervals, not warming the engine up by cruising before giving it hard acceleration and if there is an existing problem in the engine in the first place.

    So just choose the correct viscosity (b16b is spec'd for 10w-30 but can use 0w-30, 5w-30, 0w-40, 5w-40 and 10w-40 as well as per the manual if you have it), drive gently until the engine is warmed up (twice the time it takes for the coolant temperature gauge to reach the middle) and change your oil and oil filter at regular intervals.
    --------------------------------------
    Stocky CL9 - 1:17.2

  10. #34
    Account Disabled Array
    Join Date
    Sep 2004
    Location
    Sydney
    Car:
    CT9A
    Cant go wrong with 10-30w or 10-40w or 0-40w or 5-30w.

  11. #35
    Member Array
    Join Date
    Feb 2006
    Location
    Perth
    Car:
    EGSi,DC2R,ED9
    Quote Originally Posted by EK1.6LCIV View Post
    dollar for dollar, Id take the pepsi challenge and say its better using oem fluids for daily driving than castrol products
    at least in the pepsi challenge you are comparing pepsi vs coca cola products, here you are comparing castrol vs caltex products who oems for honda australia. I much rather buy the cheaper SCA calibre 10W30 oil also made by caltex and make do without the Honda oem sticker on the bottle and the right to shout OEM FEO OEM FEO YO to my frens but I rather pocket the savings or spend on better oil at similar price to FEO.
    Last edited by EG30; 22-07-2009 at 08:39 AM.

  12. #36
    can someone explain why 10w40 mineral oil (magnatec) burns more than my current oil, 10w40 semi-syn (motul turbolight)?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.