Quote Originally Posted by mrwillz View Post
ive been told this method
sounds logical anyway

whats the size tools i need to get both front and rear done? for an ek
c spanners, 14mm socket, 17mm socket, umm thats about it lol. might need a 12mm in there. and ul need another 17mm spanner or socket to hold the nut while u undo the bolt from the bottom of the rear coilver if are undoing the lca. this isnt needed if ur just gonna spin the strut while its still all connected. if ur doing it that way id suggest putting some tape around the thread and just mark a point on it. this way u can tell how many times u turn it. 1 turn = 2mm of height on buddyclub N+