Windscreen Wipers Refills

[traumatized]

brand is 'aunger' single Edge multi fit / 710mm (28”) it is made of natural rubber and coated in graphite

i think the part no. is part number OEXSE2802

[biee2]

brand is 'aunger' single Edge multi fit / 710mm (28”) it is made of natural rubber and coated in graphite

i think the part no. is part number OEXSE2802

yep....traumatized is spot on...that the one i got

[power_of_dreams]

brand is 'aunger' single Edge multi fit / 710mm (28”) it is made of natural rubber and coated in graphite

i think the part no. is part number OEXSE2802

yep....traumatized is spot on...that the one i got

thanks guys, I thought one side was longer than the other or did you buy 2*28"?

traumatized, have you had them for long?

[traumatized]

thanks guys, I thought one side was longer than the other or did you buy 2*28"?

traumatized, have you had them for long?

each pack comes with 2 refills, you just cut them to size.

i've had been for a good 6months now with no issues

[power_of_dreams]

each pack comes with 2 refills, you just cut them to size.

i've had been for a good 6months now with no issues

cool, will check it out. I suppose for $9, they can't be much worse than OEM.
are you using any washer or windscreen additives?
I'm using some ghetto armorall windscreen wash and am planning on using rainx soon (bought it, but havn't applied it)

if I look at my windscreen closely, I can see marks where the blades aren't in contact with the screen due to skipping and chattering.

[aaronng]

cool, will check it out. I suppose for $9, they can't be much worse than OEM.
are you using any washer or windscreen additives?
I'm using some ghetto armorall windscreen wash and am planning on using rainx soon (bought it, but havn't applied it)

if I look at my windscreen closely, I can see marks where the blades aren't in contact with the screen due to skipping and chattering.

Best windscreen additive that I have used is still Sonax. Bought it from Autobarn.

[traumatized]

^
that is also what i'm using, but only recently, only used plain water in the past.

yes give your windscreen a good clean and then put some rain-x before you install the new refills

[power_of_dreams]

Best windscreen additive that I have used is still Sonax. Bought it from Autobarn.

got an approximate cost on that badboy?

[revivor]

reviving an old thread;

Does anyone here has been using Bosch wipers (those frameless Aerotwin blades)...its very difficult to search for the correct size. Only can find the Aunger ones. Looking to replace my blades and prepare for the new season .
Some opinions would help. Thx.

[sash_euro]

reviving an old thread;

Does anyone here has been using Bosch wipers (those frameless Aerotwin blades)...its very difficult to search for the correct size. Only can find the Aunger ones. Looking to replace my blades and prepare for the new season .
Some opinions would help. Thx.

Just make sure they're 650mm and not 610mm i got ones that are too short lol...

Not to worry, i just used the cut off from the other blade and taped it on carefully until i get something that works...

lol dodgy... i know....

[Type R Positive]

I got the shit oem blades replaced on thursday at service. Cost $30, and they work!!!

[The X Man]

I had mine replaced just 2 months ago and they are fu**ed already! Sick of this Honda shit.