Making vtec scream?

[minhtrii]

hey guys. i just wanted to know what i should do in order to make my vtec scream louder.
1. i got a straight pipe
2. whale penis

what suggestions do you have?

thanks for your time

[vinnY]

slap on some itb's

[Mullensxxx]

its all to do with ur intake NOT ur exhaust as some people like to believe

a top fuel or j's racing style intake is prob gonna give u the most agressive crossover over a 'straight' intake

close ze thread

[VTi_b0i]

well my vtec screams with a 3inch exhaust so i believe exhaust does have some effect...

[beeza]

There's some Screamin' Vtec in this Vid!!

OZHONDA CREW YO!

http://www.youtube.com/watch?v=YSgZ4tVcf9k

[jdm_b16a]

Straight pipe? Whale Penis?

Find the G-spot and she'll really scream!

Sorry, I couldn't resist. My bad!

Peter

[DLO01]

Both intake and exhaust.

But one can overpower the over for noise depending on what you've done.

Short intake arm and big exhaust will give you noise. Its not rocket science.

[KaZe86]

no axel cai headers should do the trick

http://www.youtube.com/watch?v=rxn9B...e=channel_page

[TheSaint]

imo honodas produce 'nicer' induction roar with a modded intake than exhaust note with modded exhaust

buddyclub exhuast, de-cat, 4-1 header and a really agressive short ram intake will do it ... not the best setup for performance tho

if you can afford it ITB's will rock your world

[Chi]

Hook up a mega phone in your engine bay.

[beeza]

if you can afford it ITB's will rock your world

And ya neighbours too

[Webby_roller]

I know this isnt the answer but clean up the throttle body and the intake manifold with some subaru engine cleaner....

used this stuff (thanks beeza) and my crossovers and secondaries opening went ridiculously loud....

its beginning to quieten again so i will clean the inside again to get a bit of the residue from the PCV valve out of the secondary runners and listen to the sweet echo of the tech in my streets once again