Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
Aim: To Tuck the Winderscreen washer bottle in the gen 3 integra and make it looks more neat.
Required:
10mm socket and wrench
washer bottle from 98 spec jdm ITR
gromet ( which i got from the firewall of my other integra)
Step 1
First that off your front bumper,
refer to this if you dont know how to take it off
front bumper removal
Step 2
Locate the washer bottle on the passenger side of the car
and remove the old washer bottle out. And install the new washer bottle.
Step 3
98 spec vs 96 spec
Notice how the 98 spec hose is bendable, it can also be detached.
So once u fill it with water detach the hose.
Step 4
Plug the hole on top of the washer bottle with the grommet from the fire
wall. Surprisingly it fits pretty well. It can also be used for the rear wiper
delete if you want to get rid of yours
And the finish product should look like this
C&C welcome
I know the rest of my engine bay looks messy.. ill get to that next time![]()
Bookmarks