FD coilover help needed

[dannybubu]

hey guys...i was trying to install my coilovers on my FD last night and i ran into a problem.

I can't move the brake component at all...it's just stuck in that position. So i don't know if i've screwed something up?

I'm trying to move the blue circled areas so i can meet them up but it doesn't budge (attatching the coilovers to the brake component). I was thinking it might be the part circled in red that's stuffed up?




I'm located in templestowe, VIC if anyone wants to come over and help...just pm me.
THanks guys!

[ej20i]

hey mate, yea this is a main problem in the fd that the cv joints always pops out
same with me twice and others...
u basically have to "align" the red circled ones so that it pops back in...
my mate did a diagram here
http://www.ozhonda.com/forum/showthread.php?t=122246
best method, move it around and place a jack under the disc brake and jack it up so its perfect alignment and with hope and patients and sweat and frustration and swearing u will be able to pop it back it

it will take time
it took us 10 hours straight

best of luck mate and i can feel ur frustration

[FallenAngel]

Yes as tim said above, you popped the cv joint out...
Just align it slowly and hopefully you get it back in

Patience is the key to this...

[dannybubu]

ok sweet...i managed to pop it back in...now how do you take off the rear springs/this bolt in the boot.

As i turn the bolt...the rubber thing underneath it turns as well...

[ej20i]

u need to use an allen key at the top of the bolt...this will hold it down