Page 6 of 7 FirstFirst ... 34567 LastLast
Results 61 to 72 of 82
  1. #61
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Quote Originally Posted by nickasse View Post
    yeh sorry to dig this up again lol but here's where i'm at now:
    My engine code is b18c2xxxxxx (7 numbers after c) as oposed to b18c2xxxxxxx (8 numbers after c)
    I looked at a gear ratio calculator, went out for a drive, and found that i've got the same gearing as an itr gearbox with a 4.4 final drive.

    is it possible i've got a 96 jdm itr engine...because that's what i think i have now.
    Don't want to state the obvious, but have you checked the engine code stamped on the block? Or did you just rely on the engine code from the VIN check?
    The block will say B18C2 (VTIR), B18C7 (AUDM Type R) or B18C (JDM VTIR or Type R). That will be your definitive answer and not having to guess if you have 7 or 8 digits and who is right or wrong. Look at the area circled in the pic below:

    --------------------------------------
    Stocky CL9 - 1:17.2

  2. #62
    Newcomer Array
    Join Date
    Aug 2009
    Location
    st albans
    Car:
    EM1
    wow..just being bored reading the threads, amazed by the effort we put out to help one another. it's really good!

  3. #63
    Member Array
    Join Date
    Jan 2008
    Location
    Sydney
    Car:
    legtec @2psi
    I dont think the op is giving us the right code for his engine, as arrongg said
    The engine code will be here


  4. #64
    Member Array
    Join Date
    Apr 2007
    Location
    Greenacre
    Car:
    DC2
    shiznit ur final drive is 4.4?? ITR's r 4.7
    building up slowly...
    ________
    i < 3 JDM

  5. #65
    Member Array
    Join Date
    Feb 2009
    Location
    dayyyyyuuummmm
    Car:
    thatsafrenchassnameyvonne
    Quote Originally Posted by SHI-FTY View Post
    shiznit ur final drive is 4.4?? ITR's r 4.7
    96 spec ITRs have a 4.4 FD
    '99 Integra GSi (gone)
    '95 Integra Vti-r (drag-spec)
    '91 Cressida Grande (daily)
    MT Drag Radials, Injen CAI (dc2r) & various parts for sale:
    http://www.ozhonda.com/forum/showthread.php?t=112491

  6. #66
    ai i checked the engine block when i first made the thread. had the same numbers as the vin
    i'll check it again tommorow though
    anyone give me a way to be 100% sure as to whether i have an lsd or not...because i heard that the boosting it up and spinning the wheels method won't work on itr cos of the hydraulic lsd or something...and are the wheels meant to spin the same or opposite ways if you HAVE an lsd?

  7. #67
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Quote Originally Posted by nickasse View Post
    ai i checked the engine block when i first made the thread. had the same numbers as the vin
    i'll check it again tommorow though
    anyone give me a way to be 100% sure as to whether i have an lsd or not...because i heard that the boosting it up and spinning the wheels method won't work on itr cos of the hydraulic lsd or something...and are the wheels meant to spin the same or opposite ways if you HAVE an lsd?
    The first row printed on the engine block. What does it say? It should say either B18C2, B18C7 or B18C. Which one is it?
    --------------------------------------
    Stocky CL9 - 1:17.2

  8. #68
    Member Array
    Join Date
    Jan 2008
    Location
    Sydney
    Car:
    legtec @2psi
    your tranny will be marked in green writing LSD


  9. #69
    Quote Originally Posted by aaronng View Post
    The first row printed on the engine block. What does it say? It should say either B18C2, B18C7 or B18C. Which one is it?
    This man know what his saying lol please check it.

    But so far the information you have said it seem very likely (definately to me anyway) you have a JDM ITR engine.

  10. #70
    Member Array
    Join Date
    May 2007
    Location
    BNE
    Car:
    DC2 K20
    just post sum photos up....
    FS thread OMG heaps of parts for dc2/eg/ek wrecking eg vti!: http://www.ozhonda.com/forum/showthread.php?t=111753

  11. #71
    ai guys. It says B18C
    then underneath XXXXXXX (i don't have the car with me atm, which is why i said i'd check the block tomorrow just to double check it's same as vin (which it is) and also why i can't take pictures.)
    I reckon it comes down to the gearbox...i mean if it's itr, and therefore have an lsd, there's no way the guy:
    1. blew his engine
    2. bought a jdm integra type r transmission (cos i know my ratio is 4.4 final drive)
    3. bought a jdm SIR-G block
    4. bought a jdm/audm integra type r/civic head
    and threw it all together. it's too much effort for too much stupidity.

  12. #72
    Member Array
    Join Date
    May 2007
    Location
    BNE
    Car:
    DC2 K20
    ok then u got a jdm itr motor if there is no number next to the C
    FS thread OMG heaps of parts for dc2/eg/ek wrecking eg vti!: http://www.ozhonda.com/forum/showthread.php?t=111753

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.