EP3 Type R

**Perry** · 03-12-2009 09:51 AM

Originally Posted by tang(oO)

are you just talking about after market or everything in general?

Mainly aftermarket parts.. engine parts wise it shouldnt be a problem due to its a K series.

**tang(oO)** · 03-12-2009 09:52 AM

anything else apart from that?

**Philip Lee** · 03-12-2009 11:03 AM

stuff like bumpers, panels and windows are a hassles. just don't crash it and u'll be fine lol.

the lack of parts is a good thing, less likely to spend $$ haha

**Philip Lee** · 03-12-2009 11:07 AM

guys, any Syd EP3 meet during Dec?

i'm coming down around xmas and available on 29th afternoon.

would love to meet up.

cheers

**bradb16a** · 03-12-2009 02:16 PM

hi guys hope someone can help...
Does anyone know what the width of the rear lower strut bolt is.....
the reson my new dc5 coilover are in the house and have to get the lower rear bolt shaved so the fit ...

**Mugen_B16B** · 03-12-2009 05:03 PM

hey guys i got a prob car wont start smoothly, ive changed the plugs which i thought was the problem which i guess i was wrong, power and everything seems to be sweet, alternator working cause bat still gets charged, what else could it be cause it takes it sweet ass time to start, maybe injectors not spraying enough petrol through??? cause it seems like the petrol aint coming thought but i could be wrong

**lil_foy** · 04-12-2009 05:31 AM

Check your fuel filter and lines.
Make sure nothing it kinked.

Also check your coils are all connected properly.

**EP3 Touge** · 04-12-2009 06:47 AM

What is the widest and lowest offset that can be used on an EP3. I have a set of 17 x 9" + 22 TE37's that I would like to try and fit. Am I wasting my time?

Thanks

**lumghini** · 04-12-2009 10:35 AM

Hmm.. I suppose blk_shadow can give a bit of tip on this.. His te37 looks great!

**questera** · 04-12-2009 10:47 AM

Originally Posted by EP3 Touge

What is the widest and lowest offset that can be used on an EP3. I have a set of 17 x 9" + 22 TE37's that I would like to try and fit. Am I wasting my time?

Thanks

That spec you mention is for an evo fitment. offset is way to low for an ep3 and also too wide.

i recommend 17x8 with offset between +35 and +40 for an ep3. that will fit nicely.