Oil Leak

**DjRob** · 08-11-2005 05:11 PM

Hi guy... Just wondering if anyone has the same problem as me...

I replaced the seal and filter from the v-tec block on my b16a. Now its oil is just running out off it like a fountain. I'Ve tried to put in gasket make but when you tighten it on it blocks the filter and vtec doesnt kick in as much.

I was wondering if theres anything else i can use to try and seal it?

heres a pic of if..

http://img480.imageshack.us/img480/5286/oilleak6sw.jpg

**joyride** · 09-11-2005 08:04 AM

goo gasket? did u take it to oli? what did he say?
btw its 'vtec' doofus. lol

**DjRob** · 09-11-2005 09:21 AM

hahahaha u dumb ass. He didnt want to put in silicon coz when u bolt it back on it gets squashed and goes into the filter..

vtec v-tec vtek same shit diff smell everyone knows what it is...

i got thin gasket maker at home im gonna try it again when i finish work.

if not im gonna get insurance and burn it..

fcuken hondas, bolt snapped off when i put on the spark plug cover..
its starten to get me cut

**YaMiKaZe** · 24-12-2009 12:38 PM

bump
got a mate that has this problem, its leaking from the same area in the pic
can anyone help as to what it is?
it seems to be leaking quite alot, enough to drain all the oil in a short drive

**vinnY** · 24-12-2009 03:19 PM

which b16 is that? apparently b16a1 and b16a2 vtec solenoids were different

**duzy** · 24-12-2009 03:31 PM

lol i too have this problem on my b18

**jeffreymui** · 24-12-2009 04:27 PM

same as my b20vtec

**Sir_vtec** · 24-12-2009 10:05 PM

Yes there is 2 different types of gasket for this seal as vinny mentioned. There is a different between the b16a seal off jdm b16a1 and b16a2 compared to the audm version.

Joyride, you dont need gasket goo for this seal. All bolts should be tighten up to equal specs each to avoid any leaks.

**YaMiKaZe** · 25-12-2009 01:56 AM

its a jap spec b16a
so no numbers after the a

**B18cEG** · 26-12-2009 02:19 AM

Go to honda and get a new vtec gasket/filter for $35 also 90% of the time its actually the cam seal behind/ontop of the vtec solenoid that leaks, check it out

**Limbo** · 28-12-2009 02:03 AM

yup i've seen this on a friends car, seem to have oil pissing out when you drive.
The 2 round black seals were not fitted correct or sometimes they break (cam seals).
The top rocker cover gasket doesn't need glue, just need to be torqued up correctly

**i-jrdm** · 28-12-2009 12:20 PM

Originally Posted by Limbo

yup i've seen this on a friends car, seem to have oil pissing out when you drive.
The 2 round black seals were not fitted correct or sometimes they break (cam seals).
The top rocker cover gasket doesn't need glue, just need to be torqued up correctly

got mine fixed. i had the same problem and it was the cam seal