Page 498 of 1751 FirstFirst ... 3984484884954964974984995005015085485989981498 ... LastLast
Results 5,965 to 5,976 of 21004
  1. #5965
    Quote Originally Posted by curtis265 View Post
    Ultra unhappy with my efforts at installing these, as you can see they're not quite straight. The drill kept slipping to the right causing the pedals to be slightly wonky. Hopefully it's not to noticeable.




    edit: looking at them more, i'm starting to get ultrapissedoff with myself now >=( Once i started drilling the hole, you can't exactly move the drill again, cos you'll slip back in. My only option is to file it such that the hole gets a bit bigger...
    have you thought about drilling the hole abit bigger.. then putting rings to straighten it up?.. =S

  2. #5966
    Member Array
    Join Date
    Dec 2008
    Location
    835 Beaufort St
    Car:
    hondie 2000
    Rings? lolwut rings?

    I just drilled the holes a big bigger - still not straight enough. On the brake pedal i've got very badly... the bottom hole isn't even in the middle of the pedal T.T

    Tried redrilling near it but then it kept slipping into the hole... I'll persist later though, it'll get there eventually.

    moral of the story: don't rush the job! - mark the spot, punch it/drill a pilot hole, and then drill the big hole...

    not try to 'guess' like i did...
    Last edited by curtis265; 28-12-2009 at 02:42 PM.

  3. #5967
    Member Array
    Join Date
    Feb 2008
    Location
    Kellyville, SYDNEY
    Car:
    Civic FD1, Impreza, GE6
    u using wrong drill bits curtis, drill a smal hole first den use o-rings

  4. #5968
    Member Array
    Join Date
    Dec 2008
    Location
    835 Beaufort St
    Car:
    hondie 2000
    I don't quite follow. ru talking about washers?

  5. #5969
    Member Array
    Join Date
    Feb 2008
    Location
    Kellyville, SYDNEY
    Car:
    Civic FD1, Impreza, GE6
    thats the word
    LOL!

  6. #5970
    Member Array
    Join Date
    Mar 2007
    Location
    NSW
    Car:
    FD1 - RB1
    Quote Originally Posted by ekdez View Post
    wb.
    and no, no rr bk yet.
    you should go do it!
    no mate, i'm done with exterior.seems like i loss my 'sense' now after 1 year off from playing with car, haha
    prob next time when i get drunk

    Quote Originally Posted by JOhnnyFD View Post
    RR is way too rare to import it down here

    didnt i recall someone is doing a RR conversion??
    not the RR car, just the BK (bodykit), anyway if we willing to pay the price, we can get them easily

    Quote Originally Posted by curtis265 View Post
    Ultra unhappy with my efforts at installing these, as you can see they're not quite straight. The drill kept slipping to the right causing the pedals to be slightly wonky. Hopefully it's not to noticeable.


    edit: looking at them more, i'm starting to get ultrapissedoff with myself now >=( Once i started drilling the hole, you can't exactly move the drill again, cos you'll slip back in. My only option is to file it such that the hole gets a bit bigger...
    u should buy the one WITHOUT drilling the holes. much more easier and same strength.

    Quote Originally Posted by ej20i View Post
    u using wrong drill bits curtis, drill a smal hole first den use o-rings

  7. #5971
    Member Array
    Join Date
    Oct 2009
    Location
    head ache
    Car:
    CL9
    Quote Originally Posted by fitme View Post
    im so want the hybrid seats..
    huh? they are different to normal fd seats??
    wake up and take some sleeping tablets.

  8. #5972
    Member Array
    Join Date
    Feb 2008
    Location
    Kellyville, SYDNEY
    Car:
    Civic FD1, Impreza, GE6
    yea beige

  9. #5973
    Member Array
    Join Date
    Dec 2008
    Location
    835 Beaufort St
    Car:
    hondie 2000
    Quote Originally Posted by dmx View Post
    u should buy the one WITHOUT drilling the holes. much more easier and same strength.
    It's meant to be type-R, yo

  10. #5974
    Member Array
    Join Date
    May 2007
    Location
    Sydney
    Car:
    DC2R
    Quote Originally Posted by dny View Post
    ummm, does anyone else have a problem with the gearbox? all of a sudden my 1st &2nd gear dont get into gear... wtf!
    What do you mean dont get into gear?
    Can you drive the car? Or is it just crunching into gear?
    Have you tried double clutching to get it in?

  11. #5975
    Member Array
    Join Date
    Jan 2004
    Location
    sydney
    Car:
    seebik
    huh? they are different to normal fd seats??
    yea beige
    correct me if im wrong but i think its different from the vti/vtil seats, aside from the color and headrest(with hole just like sports),

    i think the shoulder and side area of the hybrid is more bulky than the vti/vtil


    vti/vtil



    hybrid
    Last edited by fitme; 30-12-2009 at 12:25 AM.

  12. #5976
    Member Array
    Join Date
    Aug 2007
    Location
    canberra
    Car:
    bmw
    hybrid>vti-L

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.