EP3 Type R

[ekhybrid]

As it turns out guys...My panel beater has been bullshitting me for the last month that my Front bar was in customs, when really. He CANT get one. Can anyone help me out here with sourcing all the front bumper parts..Im sick of this and just want my car back. Its Pre-Fl JDM Championship White, if anyone can get what I need please let me know, aswell as radiator and aircon unit. Thanks guys.

Twest,

Are u going thru insurance for this repair?

[bigbaby0223]

same as AUMD DC5 and S2K

Thanks. But I am after some US made pads hence the question. I am not sure if the USDM S2K uses the same pads as AUDM or JDM S2K?

[wtfhax]

Hey guys just installed Injen CAI, and the sensor grommet they gave seems to be too small (and doesnt match the instruction diagram).. so when the sensor is in, the sensor sits loose. Is that normal for you guys? Also, where did you guys mount the ground wires, there seems to be nowhere to put them.. so I just left it in the stock position and put the vibra-mount and bracket over it..

[Mugen_B16B]

Thanks. But I am after some US made pads hence the question. I am not sure if the USDM S2K uses the same pads as AUDM or JDM S2K?

no difference US made or AU made, all do the same shit so just get some endless or green stuff locally, im assuming your thinking because its made in the US it must be better?

[pair08]

AHHHH

at long last, car finally got registered today after a 5 month wait.

woooooot

[Perry]

AHHHH

at long last, car finally got registered today after a 5 month wait.

woooooot

niceee now time to Mod the thing heheh

[Philip Lee]

AHHHH

at long last, car finally got registered today after a 5 month wait.

woooooot

yay. post some pic pls!!

[Mugen_B16B]

Hey guys just installed Injen CAI, and the sensor grommet they gave seems to be too small (and doesnt match the instruction diagram).. so when the sensor is in, the sensor sits loose. Is that normal for you guys? Also, where did you guys mount the ground wires, there seems to be nowhere to put them.. so I just left it in the stock position and put the vibra-mount and bracket over it..

yeh the gromit is shit but still works fine cause when there is suction it pulls the sensor in but no air is being pull from the the gromit and the reearthing just follow the instructions, unless u got very hard to see pics on ur instructions like i got lol

[KaZe86]

Hey guys just installed Injen CAI, and the sensor grommet they gave seems to be too small (and doesnt match the instruction diagram).. so when the sensor is in, the sensor sits loose. Is that normal for you guys? Also, where did you guys mount the ground wires, there seems to be nowhere to put them.. so I just left it in the stock position and put the vibra-mount and bracket over it..

my grommet was pretty loose aswell if i can remember the earthing part goes like under the front left headlight sorta there is a spot for it and it is like in the install papers pic mine was shit quality aswell but i was sitting there for about 10 mins thinking where it goes then found it

[pair08]

haha, can't post pics atm.
car is at mech getting mods put in ^_^

i can't believe vicroads is so stingy they don't even provide number plate screws. gave me some string instead. cheapo

[Philip Lee]

mods already? i seem to recall u have exhaust and intake lined up right?

[mtonep3]

haha, can't post pics atm.
car is at mech getting mods put in ^_^

i can't believe vicroads is so stingy they don't even provide number plate screws. gave me some string instead. cheapo

woaaah what mods u getting on....??? so fast