Page 568 of 1384 FirstFirst ... 684685185585655665675685695705715786186681068 ... LastLast
Results 6,805 to 6,816 of 16607

Thread: EP3 Type R

  1. #6805
    tein springs are around 1.5" lower... its mainly cos of the after market exhaust i think that it sits pretty low
    clearance looks like 10cm

  2. #6806
    Account Disabled Array
    Join Date
    Apr 2009
    Location
    South Western Sydney
    Car:
    R32 Skyline
    Quote Originally Posted by c01567 View Post
    tein springs are around 1.5" lower... its mainly cos of the after market exhaust i think that it sits pretty low
    clearance looks like 10cm
    I pretty sure mine 1.5" lower (20mm) n the exhaust does scrub a bit. Just gotta be careful over speed humps.

  3. #6807
    Moderator Array
    Join Date
    Jul 2004
    Location
    Sydney
    Car:
    s2k,ED,EG
    Quote Originally Posted by c01567 View Post
    thinking of changing the ep3 back to stock height. currently on stech tein springs.

    any thoughts?
    Im not sure how low mine is but if your measure from the outer tyre to the guard front is 1 finger space gap and rear is 1/2 finger space for a me its a good clearance since my car was dump on its asss before.

  4. #6808
    Newcomer Array
    Join Date
    Jul 2009
    Location
    Sydney
    Car:
    Trolololley
    if we have a photoshoot please let me know cos im a little bit of a photography guy lol

  5. #6809
    Member Array
    Join Date
    Apr 2006
    Location
    I'm here right now
    Car:
    JDM K20A
    anyone here knows how to pull the door trims off? need to adjust my window glass on the reg, they r a bit loose atm.

    thx guys

  6. #6810
    random question boys, just wondering if you c-package boys have a light/s near your windscreen (so you can see your cup holders and shit at night) or is it just the middle lights which turn on when your doors open?

  7. #6811
    Member Array
    Join Date
    Aug 2004
    Location
    Brisbane
    Car:
    Ohthatsit
    If u mean map lights for driver and front passenger, then yes we have a pair near the windscreen.
    GD3 -> EP3 -> RB3

    FS Rays nuts etc

  8. #6812
    Member Array
    Join Date
    Aug 2004
    Location
    Brisbane
    Car:
    Ohthatsit
    Quote Originally Posted by blk_shadow View Post
    anyone here knows how to pull the door trims off? need to adjust my window glass on the reg, they r a bit loose atm.

    thx guys
    Push the silver trim off from the door handles, there is a small hole at the base where u can use a hex key to push the silver trim out. Which then exposed some screws. U need to undo those screws, then pull off the black trim near the mirrors. Do that very carefully as the clips snap very easily. Then check if there is screw near the silver door catch thing, undo them if there are some and I should be able to pull the door trim off.

    Pull from the bottom and side, there should be a few clips around and make sure u don't damage them. Then u should be able to lift the trim off the top. Also make sure the door catch is clear. U will then need to unplug the power window plug and the trim should now be free.
    GD3 -> EP3 -> RB3

    FS Rays nuts etc

  9. #6813
    Quote Originally Posted by Philip Lee View Post
    If u mean map lights for driver and front passenger, then yes we have a pair near the windscreen.
    jesus i miss those lights bad. always fumble for my remote. hopefully my h/u will brighten things up.

    guess this 'super racing spec' is more then just privacy glass and power windows :P

  10. #6814
    Account Disabled Array
    Join Date
    Apr 2009
    Location
    South Western Sydney
    Car:
    R32 Skyline
    Quote Originally Posted by blk_shadow View Post
    anyone here knows how to pull the door trims off? need to adjust my window glass on the reg, they r a bit loose atm.

    thx guys
    There should also be a few more screws in the lower part of the black handle of the door trim. I think there is about 6 - 8 screws in total

  11. #6815
    Ey anyone got defi gauges?? I'm looking to get some when I go hk next week... Any idea if tere is a defi hood cover for ep3??
    type[R]

  12. #6816
    Member Array
    Join Date
    Aug 2004
    Location
    Brisbane
    Car:
    Ohthatsit
    Quote Originally Posted by mtonep3 View Post
    Ey anyone got defi gauges?? I'm looking to get some when I go hk next week... Any idea if tere is a defi hood cover for ep3??
    no defi hood cover for EP3 as far as i know.

    maybe get DIN gauge if u wanna integrate them.
    GD3 -> EP3 -> RB3

    FS Rays nuts etc

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.