Page 2 of 3 FirstFirst 123 LastLast
Results 13 to 24 of 28
  1. #13
    any hints on how to get the "Honda" and the "DOHC VTEC" on the cam cover nice and shiny again? mine have got this sorta corroded look.
    VTEC YO

  2. #14
    You can possibly get sand paper and sand it carefully making sure you don't sand the red bit and then polishing it with some metal polish.

    Good trick is to get a pen/pencil/stick and wrap sand paper around that for working around small areas

  3. #15
    good tip! ill try that tonight thanks
    VTEC YO

  4. #16
    Make sure you use a fine grit, it will take a little longer, but it won't leave lines on it like a lower grit rough paper would.

    Good luck!

  5. #17
    I thought my cover was faded, will give it a light wash, if I can get a spare cover cheap enough, will get it powdercoated in yellow like the Spoon ones, then the Carbon Fiber cover will look even better!
    Every Day You Don't Practice, Is A Day You Get Worse
    (\__/)
    (='.'=) This is Bunny. Copy and paste bunny into your
    (")_(") signature to help him gain world domination.

  6. #18
    there is a DIY on doing a respray
    http://www.ozhonda.com/forum/showthread.php?t=70585

    Im thinking about it, but it looks like it'll take alot of time to do at home
    VTEC YO

  7. #19
    Member Array
    Join Date
    May 2009
    Location
    sydney
    Car:
    R34 GTT
    haha thanks 2 u i got the hids u made it look so easy to do and it was after some help from Aytac those ballasts are a pain to find space 4 them in a eg5 thought

  8. #20
    Member Array
    Join Date
    Jul 2009
    Location
    Brisbane
    Car:
    integra
    Install my hid's yesterday. Anyone get a weird audible buzz noise coming from the ballasts when you turn on your headlights for the 1st 10 sec?

  9. #21
    Member Array
    Join Date
    Mar 2008
    Location
    SYD-SG-JPN-MY
    Quote Originally Posted by ninzee View Post
    haha thanks 2 u i got the hids u made it look so easy to do and it was after some help from Aytac those ballasts are a pain to find space 4 them in a eg5 thought

    where did u decide to mount them? mines a mess!

    pics would be great nino

    Quote Originally Posted by japcollector View Post
    Install my hid's yesterday. Anyone get a weird audible buzz noise coming from the ballasts when you turn on your headlights for the 1st 10 sec?
    its the ballisters powering up - its normal.

  10. #22
    Member Array
    Join Date
    Jan 2008
    Location
    Sydney
    Car:
    legtec @2psi
    the whistle is from the filter not a leak. it happens with any pod filter


  11. #23
    Member Array
    Join Date
    Jul 2009
    Location
    Brisbane
    Car:
    integra
    Quote Originally Posted by GSi_PSi View Post
    the whistle is from the filter not a leak. it happens with any pod filter
    Nah my car wasn't even on. 100% positive its coming from the two ballast

    Quote Originally Posted by kcokla View Post


    its the ballisters powering up - its normal.
    Yeah i think ur right went to check it out and notice the bulbs gets brighter during the buzzing noise coming from the ballast

  12. #24
    That's normal japcollector

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.