the ap2 tail lights that I got unfortunately did not come with bulbs or gaskets, from what I've read it seems like you can stick the ap1 bulbs into the ap2 tail lamp... but in terms of gaskets do I need to get them from honda or should I just get the installation kit from hardtop guy... i.e. is it worth the money?
get a price from honda... otherwise just get the kit for htguy... gives you all the looms and wiring as well... although shipping might take a while...
A BIG THANK YOU to the original poster for a very helpful and detailed how-to! I just made the conversion today, looks great and found very little problems, thanks to this thread.
The only thing I would add: When you align the gasket to the body and draw the parts you have to cut, make sure that you cut all the marks (and maybe just a little more) .. otherwise you will have to keep trimming and re-fitting ..
hahaha YEA 100% not doing this ever again. does everyone rear light line up nice and flush? i cut the holes abit bigger but seem they dont line up still =s
hahaha YEA 100% not doing this ever again. does everyone rear light line up nice and flush? i cut the holes abit bigger but seem they dont line up still =s
Mine are flush, had a bit of trouble with the passenger's side. Problem ended up being the 2 new holes I drilled for the studs being a little misplaced - I widened them with the drill and managed to make the light line up properly.
Jamie I'd love to help but it's such a b*tch of an install that I really don't want to lol! If you have the right tools (airsaw and compressor) it'd be almost too easy.
Bookmarks