Fitting a Lower Tie Bar along side a JDM Sway Bar?

[traumatized]

hello all,

i have a jdm 22mm sway bar install on my vtir integra. which includes a BSQ kit and heavy heavy duty brackets (i think) well anyways i want to install a lower tie bar now but it appears that the bracket that holds the bushings is gettin in the way and the tie bar so i cannot mount it.

has anyone with a jdm sway bar installed a tie bar on their car? or has anyone have any suggestions on how i will over come this issue?

thanks.

[bennjamin]

hehe it was a matter of time.....

as i am tryign to work out with David here - on the subframe of a DC2 vtir - there is the ABS line in the way of a aftermarket CARBING tiebar underneath. I suggested using 1 or 2 washes either side ajoining the bar to the lower control arm bolts, to give it the extra height to clear the ABS line and swaybar mounts...any ideas guys ?

[traumatized]

hehe yeps the time has come hehe

Thanks Ben for the clearer explanation of the issue.

any help would be appreicated.