Results 1 to 12 of 102

Hybrid View

  1. #1
    Moderator Array
    Join Date
    Apr 2008
    Location
    Melbourne
    Car:
    '90 EF8/'94 EH9
    Quote Originally Posted by ninzee View Post
    JDM B16A (First Generation)
    The first VTEC engine Note: All JDM B16A engines are stamped 'B16A' (with no number after the "A" to identify version).

    VTEC
    Found in:
    1988-1991 JDM Honda Integra RSi/XSi (DA6/DA8)
    1989-1990 JDM Honda CRX SiR (EF8)
    1989-1990 JDM Honda Civic SiR (EF9)

    Displacement: 1,595 cc (97.3 cu in) 1.6 liter
    Compression: 10.2:1
    Bore: 81.0 mm (3.2 in)
    Stroke: 77.4mm
    Rod Length: 134mm
    Rod/stroke ratio: 1.745
    Power: 160ps (118 kW) @ 7,600rpm & 15.5kgm (152 Nm) @ 7,000rpm
    Redline: 8100 RPM
    Transmission: S1/J1/YS1 (4.4 final drive), Y1 (4.266 final drive, cable clutch, optional LSD)
    ECU code: PR3-003 (DA6/DA8), PW0-000 (EF8/EF9/DA6)
    ODB0


    JDM B16A (Second Generation)
    Found in:
    1991-1994 JDM Honda Civic Sir/SiRII (EG6)
    1991-1993 JDM Honda Civic Ferio SiR (EG9)
    1992-1995 JDM Honda CRX Delsol SiR (EG2)
    1995-1998 JDM Honda Civic Sir/SiRII (EK4)
    1995-1998 JDM Honda Civic Ferio Si (EK4)

    Displacement: 1,595 cc (97.3 cu in) 1.6 liter
    Compression: 10.4:1
    Bore: 81.0 mm (3.2 in)
    Stroke: 77.4mm
    Rod Length: 134mm
    Rod/stroke ratio: 1.745
    Power: MT: 170ps (125.kW) @ 7,800rpm & 16.0kgm (156.91 Nm) @ 7,300rpm (AT: 160ps (114.0 kW) @ 7,300rpm & 15.6kgm (152.98 Nm) @ 6,500rpm)
    Redline: 8200 RPM (AT: 7700 RPM)
    Transmission: S4C/Y21/S21 (4.4 final drive, optional LSD)
    ECU code: P28 (EG2), P30 (EG2/EG6)
    ODB1/ODB2


    B16A2
    VTEC
    Found in:


    1992-2000 Honda Civic EDM VTi (EG6/EG9 & EK4)
    1992-1997 Honda Civic Del Sol EDM VTi (EG)
    1996-1997 Honda Civic Del Sol USDM "VTEC"
    1999-2000 Honda Civic USDM Si (EM1)
    1999-2000 Honda Civic CAN SiR (EM1)
    Displacement: 1,595 cc (97.3 cu in)
    Bore×Stroke: 81.0×77.4 mm (3.19×3.05 in)
    Compression: 10.2:1
    Power: 160 hp @ 7600 rpm & 111 ft·lbf (150 N·m) @ 7000 rpm
    Transmission: Y21 or S4C
    Redline...8000 RPM
    Rev Limit...8450 RPM
    VTEC Engagement...5,500 RPM
    aluminium casting


    wikipedia extract


    Wikipedia is not a valid source man.

    However, I believe that the CRX Video Catalogue released specifically by Honda which I have on DVD is valid. And that states that the first generation B16A found in the JDM EF8 CRX SiR produces 158HP and redlines at 8200RPM.

    Though I think you're right, the B16A2 makes 160 HP and I was confused with the B16A II lol

    But the alleged figures from the information you provided don't even give accurate power conversions from HP to KW. 1 HP = 0.7457 KW.

    Therefore:
    158 HP = 117.8206 KW
    160 HP = 119.3120 KW
    170 HP = 126.7690 KW

    The figure from your quote that I have put in bold has also been edited (by you?) from the original text on Wikipedia - this is because Wikipedia states the following:

    "Power: MT: 170ps (118.kW) @ 7,800rpm & 16.0kgm (156.91 Nm) @ 7,300rpm (AT: 160ps (114.0 kW) @ 7,300rpm & 15.6kgm (152.98 Nm) @ 6,500rpm)"

    So, according to Wikipedia, the 'B16A second generation' makes 170PS/118KW? The figures don't even match up on that BS site.

    Honestly I think there are also several more variants of the 'B16A' according to different sources that make either 158HP, 160HP, 168HP or 170HP. We need to find a more reliable source...
    Last edited by dougie_504; 06-03-2010 at 04:25 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.