location of coolant bleed nut in FD civic??

**philip_pc** · 07-03-2010 05:23 PM

just out of curiosity, where is the bleed nut for the cooling system in the FD civics??

**grifty** · 07-03-2010 05:54 PM

have a look through your owners manual and you might be able to find where it is located

**philip_pc** · 07-03-2010 06:03 PM

i already tried the manual, no luck though.
it doesnt say anything about changing coolant, only how to top up via the reserve tank

**curtis265** · 09-03-2010 11:30 PM

Try this:

click here

**philip_pc** · 10-03-2010 04:33 PM

ok, doesnt mention anything about a bleeder bolt, i'd assume there isnt one then

**aaronng** · 10-03-2010 06:21 PM

There isn't one. You turn your heater to max hot, then let your engine warm up to operating temperature with the radiator cap half closed. Top up as required. Keep running the engine and checking the coolant in the radiator by taking off the cap (ONLY if you had the cap on half closed. If it was fully closed, don't open it as coolant will spray out). Once there are no more bubbles, then you're all set.