i installed the s2000 cluster into my eg about 4 months ago. It did take a long time and patience to get it working properly and functioning right after long hours of research.

Anyone that has asked me in person iv been more than happy to explain the procedure and what needs to be done. As for messaging me and needing help im sorry but its just very hard as it would need atleast 3 pages of explanation and wiring information and unfortunately i dont have the time for that.

As for the s2000 cluster swap into an eg. What is realy required it to get the pin out on paper for both the eg and the s2000 and they basically have the same labelling. From this point you just need to match the wires up together either by connecting the wires together or getting a plug and play connectors from jaycar or so. After wiring all the wires the calibration needs to be done by using the speedohealer that also needs to be purchased from ebay or other online sites. If you would like the temperature gauge to be working you will need the modifry module which is purchased off a website for $70, unless you have another temp gauge then you wont need to worry about the gauge in the cluster. The last bit would be me to modify a surrounding for the cluster to sit flush into the dash. I hope this info helps for now.