Your Mods To 2006-2011 FD Civics

**black8thgen** · 26-03-2010 01:54 PM

Originally Posted by xqwzit

^did you consider injen sri ?

Don't want an Sri lol. And Thats good to hear 9tofive Btw did u have any issues with engine light when u installed it?? U got it from shift ey??

**9ineto5ive** · 26-03-2010 02:12 PM

nah no engine light, it was just plug and play all the way. lol yea i got it from shift

**black8thgen** · 26-03-2010 02:20 PM

Ah nice. Me too lol. Hey can u take a close up engine bay pic of the intake for me pls? Thx!!!

**9ineto5ive** · 26-03-2010 04:22 PM

hey, heres some pic of the intake

and here's the cold air duct

i haven't actually fitted the cold air duct properly as it is connected to the OEM resonator. i have to find a spot at the front bumper somewhere to put the duct but i have foggies which i dont wanna get rid of.

**black8thgen** · 26-03-2010 04:30 PM

I'm puttig it to foggies anyway. Should be ok still. Btw where's ur mini blue filter thing???or didn't use it?

**ekdez** · 26-03-2010 04:31 PM

Originally Posted by Atjo

You can, it's just depends on the design of the rims like Ivan's Estatus D2 and how much camber you want to have. My camber was -6.5 when i set my camber kit to the max in order to avoid scrubbing on my RB1 and my rear wheel is 20x9.5 +15 with 10cm dish. Or flare the guard if you don't want to have camber wear. So anything could be done.

yeah i already know and understand that.. but the rims he put up. the 20" LM's on the GTR.. LM's are race wheels and are flat faced and to achieve any sort of "dish" with LM's you'd have to go rather wide. and low offset.

which is why i said look at the LM9's or the VS-XX

But with VIP styled wheels its not that hard to achieve a decent dish. different kettle of fish all together =]

**ekdez** · 26-03-2010 04:33 PM

Originally Posted by xqwzit

^did you consider injen sri ?

injen make sri?

**9ineto5ive** · 26-03-2010 04:34 PM

Originally Posted by black8thgen

I'm puttig it to foggies anyway. Should be ok still. Btw where's ur mini blue filter thing???or didn't use it?

the breather u referring to? nah i dont use that which i heard it aint good for the engine, just connect the 2 hose (the breather and i fink the other one is a vacccum hose) to one and connect that to the intake arm and your good to go

**black8thgen** · 26-03-2010 04:46 PM

Why is it bad?? I'll just follow ur setup lol. Also could u take one more pic? On the left under side of the intake, when ur facing inside the engine bay. Would be great thanks mate!!!

**Sherweeeny** · 26-03-2010 05:52 PM

Originally Posted by black8thgen

Why is it bad?? I'll just follow ur setup lol. Also could u take one more pic? On the left under side of the intake, when ur facing inside the engine bay. Would be great thanks mate!!!

i saw you today mate, car looks really nice!