Page 16 of 75 FirstFirst ... 6131415161718192666 ... LastLast
Results 181 to 192 of 894
  1. #181
    Member Array
    Join Date
    Oct 2009
    Location
    Adelaide/Melbourne
    Car:
    '04 Euro Lux
    do u guys reckon enkei rpf1's will fit with size of 18x8 with +35 offset on the cl9 without any lipping?

  2. #182
    Member Array
    Join Date
    Nov 2004
    Location
    Brisbane
    Car:
    CU2,3MPS,VESPA
    should be fine....rpf1 are hot..

  3. #183
    Member Array
    Join Date
    Oct 2007
    Location
    S.E Melbourne
    Car:
    MY07 Accord CM5
    depending on how wide your tyres are, you might need to roll your guards
    ALWAYS REMEMBER THAT FRIENDS DON'T LET FRIENDS ROCK FAKESH*T

  4. #184
    Member Array
    Join Date
    Oct 2009
    Location
    Adelaide/Melbourne
    Car:
    '04 Euro Lux
    was considering going 215 and stretch them

  5. #185
    Member Array
    Join Date
    Oct 2007
    Location
    S.E Melbourne
    Car:
    MY07 Accord CM5
    should be fine. what are you lowered on?
    ALWAYS REMEMBER THAT FRIENDS DON'T LET FRIENDS ROCK FAKESH*T

  6. #186
    Member Array
    Join Date
    Oct 2009
    Location
    Adelaide/Melbourne
    Car:
    '04 Euro Lux
    not lowered atm but will be dumping it when funds come in haha

  7. #187
    getting fn2r(18" civic stockies) rims for my euro. was thinking of running spacers. they are 18's with +55 offset. was gonna get like 8mm for the fronts and 15,20mm at the rear making like +47 fronts +35 - +40 rears. Anyone know if this would b a good look? Should i go with 15(+40) or 20(+35) spacers at the rears?

  8. #188
    Member Array
    Join Date
    Oct 2007
    Location
    Sydney
    Car:
    Accord Euro
    Quote Originally Posted by YBJLS4 View Post
    getting fn2r(18" civic stockies) rims for my euro. was thinking of running spacers. they are 18's with +55 offset. was gonna get like 8mm for the fronts and 15,20mm at the rear making like +47 fronts +35 - +40 rears. Anyone know if this would b a good look? Should i go with 15(+40) or 20(+35) spacers at the rears?
    +40 at the rears should be fine coz i'm running 8.5" +41 and one finger gap with no scrubbage. Even if you go to +35 it should be fine coz I've tried 8.5" +30 at the back with no scrub. So, if you want a more flush look then go +35.

  9. #189
    Member Array
    Join Date
    Apr 2008
    Location
    Victoria
    Car:
    Public Transport / Foot
    there's a couple of guys in here uses them oredy they look orite i dont thing there's a scrubbing issues even you dump it too. hmm why spacers ???

  10. #190
    ye my cars pretty low already just want the spacers for a more flush look rather than sitting a mile inside the guards like the 16's look when dumped.

  11. #191
    so a 18x8 +35 would be a good look on the rears? ill be running -2camber at the most. also +47 fronts?

  12. #192
    Newcomer Array
    Join Date
    Oct 2008
    Location
    WESTSIDE
    Car:
    CL9
    Quote Originally Posted by felixd View Post
    there's a couple of guys in here uses them oredy they look orite i dont thing there's a scrubbing issues even you dump it too. hmm why spacers ???
    My last set of wheels were the FN2R rims... I had no issue with any of the above mentioned. Personally, I didnt run any spacers and the look of the wheels whilst it was dropped was the BOMB. Refer to the forums to locate the image.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.