breather pipe

[Nickykeeng]

I cant push the breather pipe back into the airbox, its giving me a CEL i think. Is it important ?

The rubber sealing around it is wayy too tight to push in, any ideas?

[Nickykeeng]

ok i managed to fit it in after tinkering, CEL is still on. what now? drive around for abit? lol

[trism]

pull the negative battery terminal off, leave it for 15 minutes, itll reset the ecu, then put it back on and go for a drive

[Nickykeeng]

edit.

[Nickykeeng]

LOL ok that was noob. i dc the batt and it seems to be working fine. ;D

[beeza]

but I would reset the ECU.

http://www.ozhonda.com/forum/showthread.php?t=67113

[02gzm]

^ removing the battery lead is one way of resetting the ecu beez

[beeza]

But ya still need to let it idle for 5 minutes (dont touch anything),turn it off,then start it again though right?

[aaronng]

But ya still need to let it idle for 5 minutes (dont touch anything),turn it off,then start it again though right?

No you don't. Unless you use the Honda HDS tester to delete the idle data.

[beeza]

So just take the negative connector off the battery,leave it for 10 minutes,connect it and go for a drive?

[curtis265]

I thought u just leave it for 5mimns and t hen go driving :S

stop trying to make ur city go faster :P