Fatboyz - Do you know if there is different series of OBX itb's? They claim 48mm for B series, from what I've heard they are actually 43mm or someting at the plate, which is quite misleading and 52mm (for K series) if going by their false info would be smaller again.
I had to call up 'UNI-Filter' and get some custom sock filters made up for my quads. decided running them in a box all the time is weak haha I don't know how people run them open though. if u happen to drive down a dirt road or on a really wet day, wouldn't there just be too much risk for damage... I guess, not many people would run them open on a daily.
Last edited by DNYALL; 16-04-2010 at 06:57 PM.
WINTON PB:1:36.30
WAKEFIELD PB:1:07.59
Supported by: Hybrid Racing + Hardrace Australia MSC Performance FTW
well i was gonna just have the cf box and run a cai off them would that b good enough i think running them open on the road would attract more attention than i want
During tuning we did back to back runs with/without sock filters and the difference negligable.
We must have been doing somethig wrong then...
Without any change to the tune, just removing socks adds 8hp to the wheels.
More found with further tuning.
FWIW, A well though out airbox is best... Done right you get the best of both worlds... Smooth idle, awsome response, excellent top end, solid mid range & quite
(while more powerful than open trumpets)
Quads + resonant plenum + short ram + CAI
An airbox that is not so well thought out generally does the opposite.
Chris, the OBX quad looks to be based (dead copy of) on the old design, now discontinued Toda quad.
Throttles are based on 4AG AE101 43mm, but are not genuine so can stick.
Butterfly is 43mm, intake throat can be up to 48mm
M&M are the only company I am aware of that comercially produced an airbox for this older style of quad throttle.
The plenums they sold were alloy.
(See pics below)
Toda's new quad is a different design & available as 45mm or 50mm throttles
I'm not sure if the M&M parts are still available but at least it'll give you the idea.
(Not too hard to do yourself if you're handy with a tig & a hack saw)
Cheers
Adrian
Last edited by TODA AU; 17-04-2010 at 09:57 PM.
TODA Performance Australia Pty Ltd TODA Racing - FIGHTEX - MFactory - HALTECH - EXEDY Race engines, Dyno tuning, Licenced workshop, Parts.
P:0401869524 email: toda@todaracing.com.au
Bookmarks