Dedicated DA9 Q & A thread

[jdm_b16a]

I have a shed full of parts for the DA9, including 2 x passenger doors, 2 x passenger side guards, bonnet, 1 x driver's side guard, front and rear bumpers, front lip, taillights, bumper indicators, rear centrepiece valance (where the keyhole is), plus heaps of other stuff. Might also have interior trim like complete dashboard, cluster, heater controls, etc plus brake pads with near new padding. Also lowering springs and shocks, calipers, etc

Let me know if you need anything.

Peter

[A-man]

its empty

[thescotty]

anyone in melbourne have stock rims i could buy with tred, need them asap like today or tomoz, please call me on 0422 105 381, need them asap

[Super-DA9]

I have a shed full of parts for the DA9, including 2 x passenger doors, 2 x passenger side guards, bonnet, 1 x driver's side guard, front and rear bumpers, front lip, taillights, bumper indicators, rear centrepiece valance (where the keyhole is), plus heaps of other stuff. Might also have interior trim like complete dashboard, cluster, heater controls, etc plus brake pads with near new padding. Also lowering springs and shocks, calipers, etc

Let me know if you need anything.

Peter

ohh! what lip is it? OEM ltd edition, OEM standard, aftermarket? and what brand of lowered of shocks?

[TEG61E]

Hey guys....long time no see. I've got a DA suspension question.

What I *think* I know so far (pls correct me if I'm wrong):

Springs:
- interchangeable with EG Civics and DC2 Integras (and EK???)

Front shocks:
- interchangeable with EG/DC2 Integras, front forks needed.
- directly interchangeable with EF Civic

Rear shocks:
- directly interchangeable with EF/EG/DC2

1. Do the stock springs from a EG or DC2 change the DA9 ride height?
2. When installing the front shocks + forks from a DC2/EG, does this also affect ride height?

[lo0se3r]

> Springs are interchangeable with eg and dc NOT ek, tho height with vary depending on spring (eg springs will be lower)

> front shocks are interchangeable yes front forks are needed (i had dc2 shocks all round) same with ef tho ef shocks fit like a glove.

> rear shocks are also interchangeable with all 3, NOT DC2R or EG6

1. Yes they do eg will sit slieghtly lower/ dc2 will sit slieghtly higher

2. Yes it will, my fronts from a dc2 were higher then the rears

[TEG61E]

thanks mate - thats exactly what I needed to know. Looks like I must have some EG superlows on my car then....Koni's are on the highest perch and still having troubles with speed bumps...

looks like I need some new springs...

I've also got a boot leak....now looks like a kiddie swimming pool around my spare tyre. Its not a blockage in the drain tubes from the sunroof and boot seals are also fine. Anyone else had a similar problem?

[iggie]

I have a shed full of parts for the DA9, including 2 x passenger doors, 2 x passenger side guards, bonnet, 1 x driver's side guard, front and rear bumpers, front lip, taillights, bumper indicators, rear centrepiece valance (where the keyhole is), plus heaps of other stuff. Might also have interior trim like complete dashboard, cluster, heater controls, etc plus brake pads with near new padding. Also lowering springs and shocks, calipers, etc

Let me know if you need anything.

Peter

Peter, how much for the back bumper?, and also do you have the right rear quarter panel? if so how much?

iggie

[jdm_b16a]

ohh! what lip is it? OEM ltd edition, OEM standard, aftermarket? and what brand of lowered of shocks?

Standard (that is, OEM) lip for the DA9.

I have two sets to choose from - Pedders and Lovells.

Let me know.

Peter

[jdm_b16a]

Peter, how much for the back bumper?, and also do you have the right rear quarter panel? if so how much?

iggie

What is the right rear quarter panel? Can you describe or have photo of what you're looking for.

Very competitive prices as I need this stuff gone.

Peter

[A-man]

here guys my teg with the bolts in

[Runt]

Hey Peter.

Regarding your lip....
Oem series one or two?

I'm after series two.
Pm me a price if it is.
Thanks

Does anyone know the part number for the oem series two front lip also for the grommets that go under the wiper panel too.... How many do I need to buy too?

Cheers Will