Conversion Question

[Vtecyo]

Hey guys.

Im toying with the idea of putting the B18c2 from my crashed integra into a civic.

Im pretty sure if I buy a GLI VTI or SI EG civic, the motors wirring harness will plug in with some ease.... some convertion harnesses might be needed ( corrent me if im wrong)

HOWEVER , my main question is what if I use a Breeze for the convertion.
Im awair I will need to install a new fuel tank and fun lines and all that good stuff.

What im woundering is, If I stick my entire DC2 dash into the EG ( seen it done many times before ). Can I transplant my entire DC2 loom into the EG?

Ofcourse the EG dosnt have things like ABS and SRS. Im woundering if i just disconnect ( cut) these wires. Will with mess with the ECU too much and can I get most other things to work?

Im think I will ever swap over the entire A/C system.

PLease let me know if you think this is possable.

Thanks
Luke

[grifty]

i believe that the ABS and SRS systems run off different computers seperate to the ECU

[Vtecyo]

ah ok....
However when u get the warning lights on the dash ( error with the srs maybe ), you do an ecu check ...
Im just woundering if I will get the warning lights on my dash constatly.....

Anyone else know if this is possable?

[VTec1987]

b18c2 doesnt require any conversion harness. Everything should bolt straight up in your EG

[Vtecyo]

For an GLI VTI and SI maybe . But not a breeze....Thats my question...

[VTec1987]

if thats case, u could use the wiring from the dc2 since its EFi

[Vtecyo]

thats is my plan....u think its gonna work?

[markismaximus]

yes it will work if you know what you are doing...