Your Mods To 2006-2011 FD Civics

[Nairda]

Im not sure whether people have posted about this before, but i remember someone telling me that the K20Z2 is the achilles heel off the K series engines.

Has anyone ever tried putting K20Z1/3/4 blocks/heads onto the K20Z2? I thought all the K20Zs were rubbish until i youtubed them and saw that some mad as hatter EGs with K20Z1 and 3s...they seem to be comparable to K20As? (wikipedia told me that the Type S uses the K20Zs and so do the Euro Rs)

If it is possible then would it not open more options for people who own FD1/2s?

Sorry if this is a noob question, i havent been able to find many people who can report they have done any engine mods to their R18A1s and K20Z2s. If you know a thread please link.

Thank you =)

[aero]

^^ dont think anyone here has interchanged engine parts from other k20z engines with the k20z2.. although there is one that has had a k20z4 swapped into an fd1

in other news.. someone stole my red valve caps BUT they only took 2 of them lol. luckily they're not rays or anything expensive

[xenonkuraz]

Im not sure whether people have posted about this before, but i remember someone telling me that the K20Z2 is the achilles heel off the K series engines.

I don't think they're quite that bad! Low power output maybe...but drives nice and smooth with a good amount of torque.

[Nairda]

@ Aero
Was it a difficult job? worth doing in an FD? or is it nothing as simple as dropping a b16A into an EG4

@xenon
I wasnt saying it was a "bad" engine....id just like a little more..excitement? For a "sport" it just seems to drive a little too smooth

[curtis265]

It was me who said it was the achilles, and i said it was the Z2, you must've misread me.
The Z1 Z3 and Z4 are awesome!

You could try changing bits if u were daring...

[xenonkuraz]

http://cgi.ebay.com/ebaymotors/06-09...Q5fAccessories

What do you guys think of this short shifter kit? Looks comparable to the skunk2 etc...

[Nairda]

It was me who said it was the achilles, and i said it was the Z2, you must've misread me.
The Z1 Z3 and Z4 are awesome!

You could try changing bits if u were daring...

Lol nah didnt misread you, i said the Z2 was...Not keen on that idea, dropping in a Z1 seems to be more feasible...Is the general construction for Z2 the same as the Z1/3? Except for the internals of course do the drive train, flywheel all link up the same?

I guess what im trying to ask is that is it just a matter of taking a Z2 out and dropping a Z1 in

[blasdf]

oh yeah, coolant bypass on throttle body, here
here's info
http://www.8thcivic.com/forums/bolt-...ypass-r18.html

Some more info... with a few 'diy'ish pics.
http://www.8thcivic.com/forums/civic...something.html

sorry, posted wrong link

have you tried this? i emailed my mate that did this to one of my older cars to see what he thinks. i never got him to do it to my last car as i was happy with teh performance, but i always remember him making the change and my car had a definite boost in performance. even he was surprised. i wouldn't really try it myself as I don't know much.

it causes a funny idle, but don't know if the ecu in the new civics would be smart enough to adjust to the air temperature difference it causes.

[ekdez]

not a mod.. but you know.. i couldnt help myself hahah

[black8thgen]

HECTIKKKKKKKKKKKKKKKKKKKK. i want one, to replace my gf. =]

[curtis265]

Domo doesn't have a hole between it's legs.

I have one too, but it's legs aren't sitting..

[Stig]

Im not sure whether people have posted about this before, but i remember someone telling me that the K20Z2 is the achilles heel off the K series engines.

Has anyone ever tried putting K20Z1/3/4 blocks/heads onto the K20Z2? I thought all the K20Zs were rubbish until i youtubed them and saw that some mad as hatter EGs with K20Z1 and 3s...they seem to be comparable to K20As? (wikipedia told me that the Type S uses the K20Zs and so do the Euro Rs)

If it is possible then would it not open more options for people who own FD1/2s?

Sorry if this is a noob question, i havent been able to find many people who can report they have done any engine mods to their R18A1s and K20Z2s. If you know a thread please link.

Thank you =)

its not as simple as slapping a new head into a fd2, compression ratios in the blocks are all different in the k20z series

and also dropping a k20z4 into a fd1/2 is not cheap and it is quite difficult (i.e - ant no backyard job)

dont get too ambitious into making the current 8th series civic into a power house, it is more of a family orientated car unless you have the funds ready to do so, if it was cheap and easy most of us would already be rocking with 150kw+ atw