Civic FD Start Button

[spacekey]

The product do not include a manue?
What a strange thing!

[ej20i]

so many ppl find this problem at Jaycar
so best thing for u man, just go 2 a pc shop and ask for floppy drive power cable connector

[spacekey]

It' s really hard if you dont know the circuit of the car!

[ej20i]

go according to the instruction in the first 2 pages and u'll be fine man
just take your time and read it carefully
if u were in Sydney id help u out

[anansting]

Isn't a floppy drive cable connector 4 pin?

[ej20i]

yup, the push button has 5 pin but if u followd the instruction on the first second page u only need 4 out of thr 5

[spacekey]

Push button is really 5 pin
I have checked it

Here I upload the pic

[anansting]

Really could use some help here...went to quite a few computer shops with parts...they dont have the floppy connector

[ej20i]

i hope thats not the push button we talking about here spacekey

Anansting just go to Jaycar and bring your button and show them
i want a connector to fit these pins
if u were in Sydney i would help you out
actually
when i pass Jay car next time i will get the part number for you

[anansting]

ej20i, did exactly that when I went down looking for the part. If you do go down to Jaycar and get a part number, would be great. longers has helped me find an ebay store selling the floppy connector too.

One of the guys from the forum is coming down to help me fix up the switch soon too. Thanks!

[spacekey]

OK. I see.
Hope ej20i has solved his problem.

[curtis265]

I haven't read this thread through, but here's a DIY if anyone needs
http://www.8thcivic.com/forums/elect...g-diagram.html