you can pick them up from honda for 90cents. not sure if they answered the question but ye. and its ideal to change it i checked the size difference when i did my oil change and the ring on the old ones diameter had opened up about a 1mm. not much but eventualy will cause oil leak.
nice to know... i think i'll change mine next time now too. And what oil do you guys use - i think Magnatec (I do a lot of short trips - Wollongong ain't that big lol) is a semi-synthetic. But i've heard if you use a full synthetic it's not good for the seals...???
@ Alvis - regarding change of oil when engine is cold, can you elaborate?
i've read around with people saying that you should warm up the engine before doing an oil change. (im guessing so the oil runs out quicker)
so do i just leave the oil dripping out for longer if it was cold?
attempting oil change in the next few days..
(i actually bought a hydraulic pump jack and
[2 jack stands]
so i can jack up the front of my car)
1. it says i need some kind of hydraulic oil inside the device... what the heck?
2. i dont know the exact point to place the jack - to jack up the car lol
can anyone please help me with the above
BWAHAHAHAHAHAHAHA..........................
Sure this isn't a gee up????
lol i had a fiddle around with the hydraulic pump jack (very confusing instructions!!! - made in china)
didnt need hydraulic oil, someone stated that it should come with it, and it did.
i think some parts needed lubrication with oil thats all
Aznalex, as you appear tp be new to car maintainence, please please always use the set of car stands too. Always leave the jack where you last used it to lift the car but just shy of touching the car while the stands are in place. Never, ever work under a car only supported by a hydraulic jack.
I have a couple of small collapsable wheel chocks I use whenever I work on our cars too, got 'em from supercheap and they stay in the boot of the car in case I need to change a tyre or something.
ok sure, thanks for the tip guys. I've never used jack stands - do they have a handle or something so you can jack them up under the car? Sorry, feel like a noob now lol
lol naa u just life the car and the ones i've got u twist the top and ti twist out slowly.. the higher u want it the more u twist it. also make sure you place them on the support brackets providing on the actualy chassy of the car not on a plastic cover.. common sense.. and as for which oil to use just but the original its like 10 bux more expensive but you know it was made for your car. same with the oil filter. theres like a 3 dollar gap. not worth it. just a reminder when u change the oil filter to lubricate the new one before you put it on.. does any1 know if those filter cleaner things actually work? like engine cleaner bottles or the fuel injector cleaner bottles.. usually about 11 bux? are they any good? and how do i get a post quality point?
Bookmarks