Page 1 of 2 12 LastLast
Results 1 to 12 of 21
  1. 06-07-2010 12:08 PM #1
    djpro1
    djpro1 is offline
    Member Array
    Join Date
    Jan 2010
    Location
    Sydney
    Car:
    Euro CL9 2003

    Lightbulb [CL9] SKUNK2 TSX Exhaust.. NEED A Mid Muffler!

    Hi guys, so I got my Skunk2 exhaust fitted a few weeks ago and the drone effect is getting to me since it came with no mid muffler!

    So.. I’m now after a mid muffler which will hopefully decrease the db significantly. Can any mid muffler be retro fitted to the exhaust? And approximately how much would it cost and how long would it normally take?

    Cheers
  2. 06-07-2010 12:56 PM #2
    Lochstar_69
    Lochstar_69 is offline
    Member Array
    Join Date
    Nov 2008
    Location
    Melbourne Australia
    Car:
    Accord Euro 2004 Model
    haha tsk tsk the skunk2 rocks! i agree it drones, but thats why you need a bigger stereo! haha but really i have had mine on since boxing day and in the last 2 months its started to quiet down and now it sounds awesome and does not drone as much......
  3. 06-07-2010 01:28 PM #3
    djpro1
    djpro1 is offline
    Member Array
    Join Date
    Jan 2010
    Location
    Sydney
    Car:
    Euro CL9 2003
    Quote Originally Posted by Lochstar_69 View Post
    haha tsk tsk the skunk2 rocks! i agree it drones, but thats why you need a bigger stereo! haha but really i have had mine on since boxing day and in the last 2 months its started to quiet down and now it sounds awesome and does not drone as much......
    haha i was driving by 2 cops yesterday and had to maintain 1500rpm (the quiet sweet zone) to not drone.. in the last 2 months I'm sure u got used to the sound :P

    oh and the music helps reduce drone but on uphill, the skunk2 is unbearable!!
  4. 06-07-2010 11:31 PM #4
    sodaz
    sodaz is offline
    Member Array
    Join Date
    Oct 2004
    Location
    Sydney
    Car:
    CL9 Euro, Evo 8
    Yep you can easily fit a mid muffler at most exhaust shops. You can also consider getting 2 x hotdog resonators. It will probably cost you around $400 all up including labour. It usually takes about 1-2 hours to weld and fit.

    Also keep in the mind that the exhaust will drone less over time as carbon starts coating the tubing internally. My custom exhaust used to be very boomy and now it sounds almost like stock when cruising.
  5. 19-06-2011 10:36 PM #5
    richard_k
    richard_k is offline
    Member Array
    Join Date
    Jul 2010
    Location
    Toowoomba
    Car:
    04 Euro Lux
    buy another catback and sell your skunk2 to me :P
    Mods: Pioneer Double DIN GPS, K&N Typhoon CAI, Buddyclub N+ Spec, Topspeed Headers, Skunk2 Catback Exhaust
  6. 20-06-2011 02:00 PM #6
    white_ep3_civic
    white_ep3_civic is offline
    Account Disabled Array
    Join Date
    Apr 2009
    Location
    South Western Sydney
    Car:
    R32 Skyline
    Wouldn't adding 2 hot dogs and a mid muffler cause it to loose performance as it would restrict it more. I reckon just add one mid muffle and it should be ok. There are a few places out there that will charge $150 including labour to fit it. Make sure the muffler is the same diameter as the rest of the exhaust.
  7. 21-06-2011 07:40 PM #7
    Fredoops
    Fredoops is offline
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    It's a cut and weld job. Should be easy as. Just make sure they use a straight thru resonator nor one with different compartments like a maze.
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars
  8. 22-06-2011 01:23 AM #8
    MingZai
    MingZai is offline
    Member Array
    Join Date
    Mar 2011
    Location
    Melbourne
    Car:
    04 CL9, 11 323i
    I'm looking to buy one
    SELLING ACCORD EURO SKUNK 2 EXHAUST, J'S RACING FRONT BUMPER, LUCKYSTAR FRONT BUMPER
  9. 22-06-2011 12:04 PM #9
    richard_k
    richard_k is offline
    Member Array
    Join Date
    Jul 2010
    Location
    Toowoomba
    Car:
    04 Euro Lux
    everywhere there's a backorder
    Mods: Pioneer Double DIN GPS, K&N Typhoon CAI, Buddyclub N+ Spec, Topspeed Headers, Skunk2 Catback Exhaust
  10. 22-06-2011 01:08 PM #10
    MingZai
    MingZai is offline
    Member Array
    Join Date
    Mar 2011
    Location
    Melbourne
    Car:
    04 CL9, 11 323i
    not at heeltoe I believe
    SELLING ACCORD EURO SKUNK 2 EXHAUST, J'S RACING FRONT BUMPER, LUCKYSTAR FRONT BUMPER
  11. 22-06-2011 05:43 PM #11
    Fredoops
    Fredoops is offline
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    Quote Originally Posted by MingZai View Post
    not at heeltoe I believe
    You can't order it at heeltoe at the moment.

    Ps: whats the deal with skunk2? I wonder why it's so popular.
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars
  12. 22-06-2011 07:08 PM #12
    richard_k
    richard_k is offline
    Member Array
    Join Date
    Jul 2010
    Location
    Toowoomba
    Car:
    04 Euro Lux
    think it's just cause it's a loud and great value catback haha
    Mods: Pioneer Double DIN GPS, K&N Typhoon CAI, Buddyclub N+ Spec, Topspeed Headers, Skunk2 Catback Exhaust
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.