Results 1 to 4 of 4
  1. #1
    Member Array
    Join Date
    Jul 2010
    Location
    Melb... West Side
    Car:
    1999 DC2 Type R

    Gears/Trans Weird?

    Hi guys,
    i have a 99 type R and for some reason today when i jumped in the car the shifter felt very floppy and weird. Its like it couldn't find its gates. I started the car and everything was ok, but my reverse is now very hard to get in and out of. It needs a but of force to get it out, and it feels like its sticking.

    This happen to anyone before or anyone know whats going on?

    Thanks in Advance
    Last edited by l9emup; 29-07-2010 at 05:15 PM.

  2. #2
    Member Array
    Join Date
    Jan 2005
    Location
    Melbourne
    Car:
    180sx , DA9 sir
    thrust bearing worn maybe ...

  3. #3
    Member Array
    Join Date
    Jul 2010
    Location
    Melb... West Side
    Car:
    1999 DC2 Type R
    the thrust bearing? its not very noisy but from in the car. It has a lightened flywheel so there is a very slight noise but nothing major.

  4. #4
    Member Array
    Join Date
    Jan 2010
    Location
    Melbourne NE burbs
    Car:
    DC2
    could be something between the shifter and the gearbox? Im leaning more towards bushings maybe have started falling apart or a linkage bushing has cracked/slipped. I'd prob check that first as its a cheap replacement than a new clutch or worse

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.