Speedo not working

[LowEk]

Background:
speedo was working yesterday on my way home from work. stopped at a round a bout then after that stopped working.

BEFORE SOME GENIUS SAYS CHECK THE SPEEDO CABLE.. IT DOESNT HAVE ONE AS ITS ELECTRONIC!!!!

checked plugs behind the cluster and still doesnt work

car:
2000 EM1

engine:
B16A2

cant find the speedo sensor as im not sure where it is and tried to google it and i cant find the location of it.

Help please......

[nickk]

speedo sensor is located top of the gearbox. If your looking into the engine bay, its to the left of the intake manifold and straight down.
You will see a plug going into it. Easy to find. If you have trouble, I can post a pic tonight.

i think you should have posted this in model specific too man.

[LowEk]

speedo sensor is located top of the gearbox. If your looking into the engine bay, its to the left of the intake manifold and straight down.
You will see a plug going into it. Easy to find. If you have trouble, I can post a pic tonight.

i think you should have posted this in model specific too man.

Thanks nickk. i thought that was the speedo sensor. how can i test if thats my problem??

Sorry if this is in the wrong section can mods move it if it is..

[Samm928]

trial and error. get one and whack it in.

[nickk]

not even. usually its the connectors in the plug. I had the exact same problem.
Easiest way to diagnose what is:
Unplug wires going to speedo sensor, in the plug you will see a white cover, take this off with pliers or a flat blade.
Then roll up tiny tiny strips of foil, with a paper clip push them inside each connector (there are three).
Then clip the white cover back in and put the plug back onto the speedo sensor.

If it starts working then all you need is a new plug, which you can get from any wreckers.
If its still not working it's the VSS (vehicle speed sensor) or possibly the cluster.

Before you try the foil strips try just disconnecting and reconnecting the plug and push hard on it when you plug it back in.

[LowEk]

not even. usually its the connectors in the plug. I had the exact same problem.
Easiest way to diagnose what is:
Unplug wires going to speedo sensor, in the plug you will see a white cover, take this off with pliers or a flat blade.
Then roll up tiny tiny strips of foil, with a paper clip push them inside each connector (there are three).
Then clip the white cover back in and put the plug back onto the speedo sensor.

If it starts working then all you need is a new plug, which you can get from any wreckers.
If its still not working it's the VSS (vehicle speed sensor) or possibly the cluster.

Before you try the foil strips try just disconnecting and reconnecting the plug and push hard on it when you plug it back in.

will do thanks nickk

[ECU-MAN]

Thanks nickk. i thought that was the speedo sensor. how can i test if thats my problem??

Sorry if this is in the wrong section can mods move it if it is..

http://www.ozhonda.com/forum/showthread.php?t=68441

[LowEk]

http://www.ozhonda.com/forum/showthread.php?t=68441

Thanks man

[LowEk]

as thought its throwing code 17. now just to locate one cheap enough.. $230 new genuine...

[nickk]

wreckers! Pretty sure most civic vss's are interchangeable.

[LowEk]

wreckers! Pretty sure most civic vss's are interchangeable.

yeh its kinda hard as i live in north qld and the only parts wreckers have up here are all bogan holdens and fords...

[markismaximus]

Pretty sure most civic vss's are interchangeable.

not the case, auto and manual are different. EG - EK have different mounting points also. D-series boxes also differ from B-series. D's have plastic gears and B's are metal