Results 1 to 2 of 2

Thread: clutch issue

  1. #1
    Member Array
    Join Date
    Sep 2009
    Location
    West sydney
    Car:
    Integra DA9

    clutch issue

    Ok OzHonda lets see how good you are.

    Honda Integra 1990, B18 non vtec motor, YS1 gearbox manual, Standard clutch Apexi i think... something like that

    Recently gearbox and clutch was changed... about a few weeks ago cars been fine since. Today im driving its pissing rain.. clutch suddenly starts feeling hard to press.. i pulled over pull up the bonnet check the cable.. area turn off the motor everythings fine..

    start the car drive a bit more .. clutch gets harder n harder. starts making like a grinding noise when i press it.
    Still gets in gear.. fine.. but does rattle alot in changing gears. (as if im not giving enough gas.. )

    Tried re adjusting clutch but its at its limit. Now as i press it down makes a slight grinding noise.. as i press it and let it go.

    Went to just a quick petrol station mechanic he reckons coolant got in (i had a tiny bit of a coolant leak from the hose) Can coolant do that :S ? i dno wtf is the problem its still very hard to drive rattles every gear except 4th to 5th because i barely need to even give gas for that.

  2. #2
    Member Array
    Join Date
    Sep 2009
    Location
    West sydney
    Car:
    Integra DA9
    Thread can be closed..

    It was the hinge on the gearbox that the clutch cable connects to

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.