Maximum Wheel size for CL9 Euro?

**teggiboy** · 19-08-2010 11:35 PM

thanks for all ur input guys!

I'm thinking about these rims. Has anybody seen something like this on a Euro before?

http://cgi.ebay.com.au/Lenso-PROJECT...ts_Accessories

**teggiboy** · 19-08-2010 11:38 PM

Originally Posted by ricerockets

im running 9's on the rears and 8's on the front but the 9's have a pretty high offest +67 with an 8mm spacer might up it to an 15mm one soon tho =P no mods to guards for me tho

to widen the guards, you could roll the lip so that flap on the inside is flat allowing a little bit more clearance
or you could flare the guards giving more clearance too

so 9" in the back fits straight on with no mods? The tyre shop told me 8" is prolly the max... I would really love 9's with no mods

**RiceMeister** · 20-08-2010 03:20 PM

a 10" with that offset will NOT fit. thats an extreme fitment for any car, let alone a honda. if you want to go 10's look at the +20's for offset, but you will have to do lots of guardwork/camber so beware haha

with a 9" all you'll have to do is roll the rear guards and relocate bumper tabs which is really easy and not a biggie at all.

**felixd** · 20-08-2010 03:23 PM

be a wacko do 18x10 +10 at the rear with 18x9.5+ 12

**RiceMeister** · 20-08-2010 03:37 PM

haha you couldnt fit 9.5+12 without air and you can't drive it so don't tempt him to go more aggressive lolol

**Stig** · 22-08-2010 02:22 PM

air is always the way to go

**felixd** · 22-08-2010 10:01 PM

theres always a way though just need to use the correct size tires

**NEWTEK** · 23-08-2010 06:20 PM

Im running 20x8, fit well!!

**RiceMeister** · 23-08-2010 09:08 PM

Originally Posted by felixd

theres always a way though just need to use the correct size tires

you should have gone 215's would have fit in the end, plus some guard work

**x10Hz** · 24-08-2010 09:45 AM

dont go 20's, you cant get as much lows

**ck.kyo** · 25-08-2010 05:07 AM

How much work would 18X9+30 fronts 18X10+25 rears need?

**x10Hz** · 25-08-2010 09:04 AM

Originally Posted by ck.kyo

How much work would 18X9+30 fronts 18X10+25 rears need?

to run the fronts all you will need is the lip folded back and the liner cut/removed. For the rears, you will need both those things + a light to medium pull, also you may need a spacer because the inside of the wheel may rub on your strut. on my rear (9.5 +25) i have about 10-15mm clearance. it will be .5inch less for you.. which means you will have 1.2 approx less space then me. Camber will also play a role for your rear clearance, the more negative camber you have the less space there will be. And you will have to run atleast 225/40/18 otherwise your tyres prolly wont fit, unless you will be sitting 10ft in the air.

this is just based on my experience tho