Your Mods To 2006-2011 FD Civics

**PLY44** · 07-09-2010 06:51 PM

?!?!?! really?! i got it running, home made light tester haha, my white wire was power, i got 3 speakers running, but have no clue wat wire is my acc power. I've tried all the different combinations but its not working for me. Only 3 speakers are running atm. Not to sure what to do.

**xenonkuraz** · 07-09-2010 07:58 PM

take a pic and show us your wire loom...ill show you what they're meant to be

I think the white wire is constant power so you don't wanna use that one

Try this?

:Radio Harness
+12V DC Constant White
Switchedd Accessory Violet
Ground Black
Power Antenna Gray
Remote Turn On Light Blue
Illumintation Red/Black or Gray
Left Front + Light Green
Left Front - Pink
Right Front + Gray
Right Front - Brown
Left Rear + Yellow
Left Rear - Brown
Right Rear + Blue
Right Rear - Orange

**curtis265** · 07-09-2010 08:30 PM

Shouldn't the massive wires be power? Should'nt be too difficult to find which one is live right?

Tim needs an orange lip kit

**xenonkuraz** · 07-09-2010 09:45 PM

just sprayed my calipers blue...

got cbf halfway through and rushed it

looks alrite still

**PLY44** · 07-09-2010 10:08 PM

thanks xenon that helped heaps.

**dannybubu** · 08-09-2010 12:02 PM

anyone changed their fd1 front and rear brake discs and brake pads?? any recommendations? coz honda said i need to change my rear brake pads and get the discs machined coz it's out of alignment...

**threesix** · 08-09-2010 12:10 PM

my car has done around 45k with the stock pads. i thought they might be due for a change. asked my mechanic to check em while he was doing a service and said id be able to get at least another 30k out of em. (hybrid driving tho lol) stoked!!

**xenonkuraz** · 08-09-2010 12:15 PM

Yeah same here. I'm on 47,000km and my brakes are still 80% but they may have been changed...

^danny I recommend if you want to upgrade your rotors get some aftermarket cross-drilled or slotted ones. Will probably cost less than OEM but look much better.

However if you want to save your money just machine your current ones...should have plenty left on them

**xenonkuraz** · 08-09-2010 12:28 PM

Anyone know where to get long anodized lug nuts that aren't rays? They're so expensive

**PLY44** · 08-09-2010 12:31 PM

Bored.

**FallenAngel** · 08-09-2010 12:32 PM

get some slotted rotors if you need to change them.

If your after cheap pads go for lucas or bendix pads. If you're want abit more force then have a look at intima brakes or hawks HPS