[CL9] Low offset wheels

[mattchuej8]

spincity, taleb, tempe, aaa, big o, st george



So i know i can run 18x9 +35 at the rear. but will these goes at the front? ive been on rimtuck but no one is running that fitment at the front.

[felixd]

18x9 +35 is orite i suupose at the front but u will rub abit just get ur fender trimm n roll u shuld b fine

[RiceMeister]

Sem is running 18x9.5 +25 and is slammed hard with no rubbing whatsoever. so yes, a x9 +30 will fit no worries.

he is also on coils and is very low. you will need to run a 225/40 tyre and trim the fender liner as said. it will sit nice and flush no worries at all.

you can go A LOT more aggressive if you really want to.

[elitee]

ok so i got a reply from ISC on the CST hypers they have.

Guess as said before they are now the battle as they only come in 18x9.5 +15 or 18X9 +30

What sort of work is involved going that low of a offset ?

guards rolled, and rear bar shaved massive negative camber im guessing

[x10Hz]

is there a website that anyone would recommond for wheels?
i look at rota aust n thats it

dont go rota dude :P

ok so i got a reply from ISC on the CST hypers they have.

Guess as said before they are now the battle as they only come in 18x9.5 +15 or 18X9 +30

What sort of work is involved going that low of a offset ?

guards rolled, and rear bar shaved massive negative camber im guessing

you will need all the liner cut away, rear bumper tabs moved back, and a mild pull at the rear. PM me and i can give you details of a guy that does a very very good job on euros
In terms of camber, natural camber is fine if you wanna tuck (but thats on a +25 offset) with the mild pull tho you should be fine with natural camber.

[RiceMeister]

As Sem said above...with the right work it CAN be done.

1. Guards rolled
2. Mild pull on the rear
3. Fender liner cut and modified
4. Bumper tab relocation.

probably be looking at something around -3 camber all round. which isn't ridiculous either.

it looks like a lot, but its all done at once and will take about 4 hours at our mates shop. He does a really good job.

Here is a TSX running 18x9.5 +15 MB Battles with 215/40/18 tyres and natural camber rear and a camber kit at the front...

Push the limits! you CAN do ANYTHING

[elitee]

Wow looks soo good !

i am seriously considering it.

Lucky it wont be my daily !

[RiceMeister]

hellaflush FTW.

[x10Hz]

Wow looks soo good !

i am seriously considering it.

Lucky it wont be my daily !

i realised that your not from melb :P cant refer you to our guy

[RiceMeister]

i realised that your not from melb :P cant refer you to our guy

lol fly Costa up.

[sangyz]

pwah.... hoooo...hooo i cant say the word... HOT!. jesus! Is that a lip on a front lip? lol

[x10Hz]

pwah.... hoooo...hooo i cant say the word... HOT!. jesus! Is that a lip on a front lip? lol

its a rubber lip protector, its basically a piece of rubber used on the bottom of garage doors, can get it from your local bunnings etc. just attached with doublesided tape