View Poll Results: Should we relabel this thread ***Official What did you do to your EG/EK today***?
- Voters
- 260. You may not vote on this poll
-
HIDs cost like $100,
If that is more than what you spend on your GF then you got issues coming lol
-
 Originally Posted by Riced_Civic
well a 4 inch cannon will never be legal, its one of those things if the police just look at its and automatic "thats to loud." defect.
also ive never seen a 4inch cannon pass an EPA b4 so maybe u could be the 1st and post up ur results.
last time i got EPa'd i put on a tiny small axle back with a huge big fat muffler with a prob 1" tip on it and it literally read exactly on the limit. he passed it though so got the job done.
Also, Danny, where did you get the wheel alignment done?
WINTON PB: 1:36.30 WAKEFIELD PB: 1:07.59 Supported by: Hybrid Racing + Hardrace Australia
MSC Performance FTW
-
got my wheel alignment done at Donnallans down in Box hill for now as i cbf goin to centerline as its far as for me to get there just for an alignment.
i will go to center line later on to get all the corner weighting, dampers and rebound set up done later on down the track when the EK get a little more serious.
Car: 05' Civic Turbo Car: EK 97'
Motor - D17 Motor - B20T
Winton - 1:47 Winton - 1:46
7th Gen Melbourne #1
-
 Originally Posted by Riced_Civic
got my wheel alignment done at Donnallans down in Box hill for now as i cbf goin to centerline as its far as for me to get there just for an alignment.
i will go to center line later on to get all the corner weighting, dampers and rebound set up done later on down the track when the EK get a little more serious.
Centreline??? where and what place is that? i am assuming they specialise in that sort of thing? got some more details for me?
Donellians in Box Hill were absolute pricks to me last time i went there for an alignment. I left my car there with a sheet of the specs that i wanted, camber, caster, toe etc and they were like "yeah sweet as mate, no worries, come back in an hour and we will be done" went back in an hour and my car was on the machine and the guy says to me "mate, we didn't do anything to your car, it will take us too long to adjust it because of the camber arms" "we can make more money just buy doing normal wheel alignments and with your car it will just take too long and we won't make any money, so take it somewhere else"... All said in a bit of an asshole voice too. Never again to that place.......... 
I took it to the Dunlop centre out near the city, can't remember which town exactly but they adjusted my car in about 30 minutes to the exact specs I wanted. I would go back there but was soo far away. will if i have to though
WINTON PB: 1:36.30 WAKEFIELD PB: 1:07.59 Supported by: Hybrid Racing + Hardrace Australia
MSC Performance FTW
-
yeah centerline specialise in car set up for track work, they do weighting, alignments ect, ect. ill get back to u with more info on centerline 2morrow and get u some exact details.
yes i agree about donnallans now, i think its cos the older EK model they use the fork type camber arms and it makes them do more work so they get lazy and do a rush job. i was just there just to get the car goin straight with just small camber adjustments so it wasnt to bad.
Car: 05' Civic Turbo Car: EK 97'
Motor - D17 Motor - B20T
Winton - 1:47 Winton - 1:46
7th Gen Melbourne #1
-
 Originally Posted by Tai
HIDs cost like $100,
If that is more than what you spend on your GF then you got issues coming lol
im not talking about juss the HIDs bud about the WHOLE CAR.
-
haha... you guys make me laugh. If she doesn't notice don't tell her. If she does 'it was cheaper for cash' is ur best line
-
bought a xforce twin loop s10 for my ej8 off a mate! with extra 2.25 piping for 150, and got quoted 120 to install from an exhaust shop inc. flanges =]
-
Im gonna stop spending on the car , the only thing is maybe oil change, but modding the car will be on hold till 2011 due to wanting to go over seas and buying ps3 just for GT5 :P
-
 Originally Posted by DNYALL
Centreline??? where and what place is that? i am assuming they specialise in that sort of thing? got some more details for me?
Donellians in Box Hill were absolute pricks to me last time i went there for an alignment. I left my car there with a sheet of the specs that i wanted, camber, caster, toe etc and they were like "yeah sweet as mate, no worries, come back in an hour and we will be done" went back in an hour and my car was on the machine and the guy says to me "mate, we didn't do anything to your car, it will take us too long to adjust it because of the camber arms" "we can make more money just buy doing normal wheel alignments and with your car it will just take too long and we won't make any money, so take it somewhere else"... All said in a bit of an asshole voice too. Never again to that place..........
I took it to the Dunlop centre out near the city, can't remember which town exactly but they adjusted my car in about 30 minutes to the exact specs I wanted. I would go back there but was soo far away. will if i have to though 
search up trutrack suspension. i'll be taking my car there when its ready.
-
thats also another place thats ive heard of thats good.
Car: 05' Civic Turbo Car: EK 97'
Motor - D17 Motor - B20T
Winton - 1:47 Winton - 1:46
7th Gen Melbourne #1
-
i've called both trutrack and centreline and trutrack seemed way more helpful and informative then centreline, so i'll be taking my car there.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks