Results 1 to 10 of 10
  1. #1

    b16 - car starts but doesnt rev freely

    hey guys, just got a eg with a b16a

    the car starts but it idles really low - chokes and doesnt rev

    i have checked and cleaned/replaced - spark plugs, leads, dizzy, injectors, fuel pump ( but ive heard that fuel pump can still flow but wont have pressure or something), checked and swaped over a working ecu, timing, ignition timing.

    really confuzed about this - the only thing i havent checked is fuel filter but i dont think that would do anything.

    would really appreciate it if someone could help
    Last edited by Johnn_Q; 12-09-2010 at 03:14 AM.

  2. #2
    Member Array
    Join Date
    Aug 2009
    Location
    Front yard
    Car:
    4WD 89 Concerto
    the fuel filter could be blocked so change that aswell.
    OEM parts whore

  3. #3
    i was thinking in the lines of fuel pump - should i change the filter first?

  4. #4
    u can just take it out and see if the fuel filterin it is clean by looking at it and seeing whether or not its clear with no colour like water and try tap it on the ground and see if spec come out.
    i also have the same problem as you, ive cleaned my iacv and replaced the fuel filter but my car still stalls when driving. i find that putting it in neutral and reving it up near the high 4-6k's a few times like a ricer fixes it temporarily, sometimes a whole day. good luck with fixing your problem and let me know when you do figure out what it is so i can give it a try on my integra

  5. #5
    lolz, my car doesnt even rev pass 1k, hence doesnt rev freely

    it starts than boggs as soon as u tap accerlator. idles about 200 maybe 400.

    when i checked the fuel pump there was clean fuel commin out

    ill take a look at the fuel filter tomorrow when i get a chance.

  6. #6
    Do the injectors run off a resistor box like in the ed/ef crx's?

    if it does, then check that and all associated wiring.

    icm inside the dizzy

  7. #7
    Moderator Array
    Join Date
    Apr 2008
    Location
    Melbourne
    Car:
    '90 EF8/'94 EH9
    Done IACV? MAP? Adjustable your accelerator cable?

  8. #8
    Quote Originally Posted by Bludger View Post
    Do the injectors run off a resistor box like in the ed/ef crx's?

    if it does, then check that and all associated wiring.

    icm inside the dizzy
    unsure about this one !


    Quote Originally Posted by dougie_504 View Post
    Done IACV? MAP? Adjustable your accelerator cable?
    yer ive checked those and checked vacum hoses etc - i usually accelerate using the throttle body

  9. #9
    Member Array
    Join Date
    May 2010
    Location
    Newcastle
    Car:
    Honda Integra Type R JDM
    Quote Originally Posted by Johnn_Q View Post
    usually accelerate using the throttle body
    damn u must have long arms :P

    have you tried cleaning the intake out? on my cousins civic we sprayed a fkload of carby cleaner in the intake then some contact cleaner and you should of seen the crap that came out.
    jdmEG5: Will u take 2 ounces of weed +$500 your way? I'm not kidding.

    Speed is a matter of money... How fast can you AFFORD to go?

  10. #10
    its a small metal box with heat sinks. it has wiring runnig to the injectors, have a look.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.