urgent hondata help!!

[Alexplicit]

hi guys.

ive finally gotten to drive my integra with my new hondata, and ive noticed that its stuck in launch control. i cant rev past 4200 ? can anyone help me please

alex

[Alexplicit]

ive read up and i dont have a clutch switch. and i cant log onto the hondata through my laptop cause i dont have not purchased the software, i bought this ecu off vtec1987 it was already tuned for a b18cr which is the engine in my car... so i dont know what im going to do

[DLO01]

Depends how launch control is setup in your specific instance. Speak to vtec1987. You can download the software from the Hondata web site:
http://www.hondata.com/downloads.html

You can turn Launch Control off via a laptop connection and the software. Please be carefull not to stuff anything else up, if you dont know what your doing.

[Alexplicit]

i would like to keep launch control.

and i cant connect my laptop to the hondata s200 because i didn't purchase ROM editor or whatever its called therefor i don't have to Hondata serial to usb cable.

i have read that you can make a switch out of the existing clutch switch is this true?

[Alexplicit]

out of curiosity could you rig up a brake light switch to make a clutch switch? and how would u do it? would it need power... only reason this is urgent is because its going on the dyno tomorrow..

[Alexplicit]

bump!!

[Alexplicit]

actually am now beggining to think that the eu is in limp mode... will check and report back

[teh_mechanic]

im not much help but my hondata s300 went into what i imagine was limp mode last week after I jump started it because of a flat battery. Ran super rich and rev limited at 4000ish. soon as i got to work, stopped car, put a new battery in it, then ran fine ever since. So i think you are stuck in limp mode or at least some kind of base tune

[Alexplicit]

hmm thanks mate... well my battery is almost flat cause its just sitting now

might charge her up and have another look at the connectors in the s200 box thanks