Okay today I decided to repair some scratches on my bumper for the very first time. I researched and I knew exactly what I was doing. It all went really well until I peeled the masking and removed the newspaper.
This is what it looked like before, I also have other marks on the car but I started on this because its the most minor:
http://img830.imageshack.us/i/img0376.png/
Masked up: http://img41.imageshack.us/i/img0377.png/
Okay so I painted the area like this:
1. Sand down 270 grit.
2. Wax and Grease remove.
3. Primer 2 coats.
Primed Pics:
1st coat: http://img194.imageshack.us/i/img0378.png/
2nd coat: http://img36.imageshack.us/i/img0380k.png/
4. Sand down 270 grit.
5. Wax and grease remove.
6. Car paint 2 coats.
7. Masking and newspaper removed
Masking removed:
http://img185.imageshack.us/i/img0382.png/
http://img259.imageshack.us/i/img0384.png/
Need tips on re-doing this job.
EDIT:
Read Page [2] for 2nd attempt at this repair
NEW PICS ARE ALSO UP ON PAGE 2 FOR before AND after pics. Check em up and comment (my very own DIY)
Bookmarks