Euro 2010 Tail Lights Removal Help Pls

**cabra80** · 13-10-2010 10:28 AM

Honda Accord Euro 2010

I have managed to remove 4 screws at the back of the light but the damn thing won't come out

Does anyone have any tips or diagrams for removing the rear tail lights? I've heard you need to remove the rear bumper to get to those. Any type of instructions/etc for getting those lights out and then replacements back in would be greatly appreciated.

**felixd** · 13-10-2010 10:35 AM

there will be a tail light supporter behind the bumper that u need to unscrew.

take out the bumper and u will be able to see without removing it theres no way to take the tail lights out cheers

**cabra80** · 13-10-2010 10:39 AM

thnx for ur advice . My Dad suggested me to use grinder and cut the broken light in half ;p
cheers mate.

**felixd** · 13-10-2010 10:42 AM

LOL grinder .u still need to take off the rear bumper as there will be 2 screws coming from that supporter to make it a clean job

just to let you know to remove the bumper u only need to take out a 2 screws and about 4 tabs underneath easy peasy

**cabra80** · 13-10-2010 10:46 AM

okay..I know the tabs beneath. pls tell me where Honda hide the 2 screws ??

**felixd** · 13-10-2010 10:51 AM

when u open the rear boot there will be 2 sitting covered like on the bumper

just need to take out the small plasctic cover off and u will see the bolt

if i can remember 10 mm bolt

**cabra80** · 13-10-2010 10:57 AM

Awesome. Thank you

I'll let you know if I can sucessfully do it. And may be this thread useful for ppl in the same situation.
Cheers mate. You rocks

**felixd** · 13-10-2010 11:03 AM

no worries u mite wanna take a some photos n put it up here so we can rep u

**cabra80** · 07-11-2010 10:05 AM

Sorry, it takes a while to get back to this topic. I have successfully replaced my tail light. Saving a few bucks on the labour

I have never been doing this type of job before...so thanks to felixd who had been giving some tips where to start from. Anyway, I hope this thread could be helpful for some people who want to replace their broken tail light. Umm...one thing is that I'm too lazy to copy, paste words, so if you wanna read the full instruction, just visit my blog. Below is the summarised instruction of the job.

After removing the bumper, you will see the bracket where you can put on the new light.