Page 226 of 313 FirstFirst ... 126176216223224225226227228229236276 ... LastLast
Results 2,701 to 2,712 of 3745
  1. #2701
    Member Array
    Join Date
    Feb 2009
    Location
    Boronia, Victoria
    Car:
    91 DA6
    melbs better though lol
    Build Thread http://www.ozhonda.com/forum/showthread.php?t=128210

    RIP 1992 Horizon Grey DA9
    Current 1991 JDM Burgundy DA6, with 108kw atw B18A1

  2. #2702
    Member Array
    Join Date
    Jan 2004
    Location
    Adelaide Hills
    Car:
    DA9T+Euro
    Easiest of all would be a B16A from a DA6, everything bolts up, only wiring is a bit different and they come standard with a cable gearbox. not sure if it is a huge improvement though, you lose torque but gain revs and top end power
    DA9 LS w/JDM SiR B18C turbo
    Looking for older Honda project car pre-1985


  3. #2703
    Member Array
    Join Date
    Apr 2010
    Location
    Sydney
    Car:
    DA9
    b20 non vtec, should cost no more than $1500 installed
    massive torque..
    i have a b20/b16 vtec and i hardly even get into the vtec zone because it has so much torque

    edit: short ratio gearbox helps alot also

  4. #2704
    Are you running powersteering? If so which brackets and pump?
    I have signatures turned off

  5. #2705
    Member Array
    Join Date
    Apr 2010
    Location
    Sydney
    Car:
    DA9
    standard ones, aircon also

  6. #2706
    Member Array
    Join Date
    Sep 2009
    Location
    West sydney
    Car:
    Integra DA9
    Got a friend with a CRX DELSOL JAP SPEC sitting there it is a 1.6cly vtec. Not sure what kind of motor never took a good look, the gearbox is gone but the engine is fine.

    JapSpec Vtec engine.. im gona assume wil make my DA a rocket his willing to give me the engine, Just curious anyone know differences and problems i might run into?

    I have a YS1 Cable Gearbox atm and installed i just got the standard b18a

  7. #2707
    Member Array
    Join Date
    Feb 2009
    Location
    Boronia, Victoria
    Car:
    91 DA6
    Quote Originally Posted by slimx View Post
    Got a friend with a CRX DELSOL JAP SPEC sitting there it is a 1.6cly vtec. Not sure what kind of motor never took a good look, the gearbox is gone but the engine is fine.

    JapSpec Vtec engine.. im gona assume wil make my DA a rocket his willing to give me the engine, Just curious anyone know differences and problems i might run into?

    I have a YS1 Cable Gearbox atm and installed i just got the standard b18a
    ull lose torque, somethin u might want considering da is heavier than crx, but the gearbox will bolt up if u use the ys1 clutch and flywheel,
    long as the engine is a b series, there all pretty conbatible, prob is ys1 gearbox is long ratio and will be crap for a b16, so basicly itll be slower than what you currently got
    Build Thread http://www.ozhonda.com/forum/showthread.php?t=128210

    RIP 1992 Horizon Grey DA9
    Current 1991 JDM Burgundy DA6, with 108kw atw B18A1

  8. #2708
    Member Array
    Join Date
    Sep 2009
    Location
    West sydney
    Car:
    Integra DA9
    ill be sticking to my lovely b18 then lol

  9. #2709
    Member Array
    Join Date
    Feb 2009
    Location
    Boronia, Victoria
    Car:
    91 DA6
    Quote Originally Posted by slimx View Post
    ill be sticking to my lovely b18 then lol
    haha yup unless u can get the short ratio gearbox that goes with b16, it will be slower
    Build Thread http://www.ozhonda.com/forum/showthread.php?t=128210

    RIP 1992 Horizon Grey DA9
    Current 1991 JDM Burgundy DA6, with 108kw atw B18A1

  10. #2710
    Member Array
    Join Date
    Apr 2010
    Location
    Sydney
    Car:
    DA9
    woo i received the products that i payed for today,
    he told me he sent it 2 weeks ago, but was only sent on the 18th.
    im happy it all worked out..

  11. #2711
    Member Array
    Join Date
    Feb 2009
    Location
    Boronia, Victoria
    Car:
    91 DA6
    Quote Originally Posted by espionage85 View Post
    woo i received the products that i payed for today,
    he told me he sent it 2 weeks ago, but was only sent on the 18th.
    im happy it all worked out..
    Nice man
    Build Thread http://www.ozhonda.com/forum/showthread.php?t=128210

    RIP 1992 Horizon Grey DA9
    Current 1991 JDM Burgundy DA6, with 108kw atw B18A1

  12. #2712
    Member Array
    Join Date
    Mar 2010
    Location
    SE Melbourne
    Car:
    DA9
    Quote Originally Posted by espionage85 View Post
    woo i received the products that i payed for today,
    he told me he sent it 2 weeks ago, but was only sent on the 18th.
    im happy it all worked out..
    Glad it all worked out for you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.