Results 1 to 6 of 6

Thread: Mods for EU3

  1. #1
    Member Array
    Join Date
    Jul 2007
    Location
    JDMD15B
    Car:
    14EGs/8EDs/3EKs

    Mods for EU3

    Hi guys,

    Just wondering what sort of mods can be put on the EU3 from other Honda's ?

    Front lips/side skirts/fog lights/rear lips/grill's etc

    Also for interior:
    Arm rest
    Cluster

    etc etc

    What sort of suspension is compatible with the EU3 from other Honda's ?

    Also what about headlights/tail lights ?

    Thanks!
    JDM D15B - you wouldn't understand

    No K-SWAP ? No worries - Unfriend

  2. #2
    Member Array
    Join Date
    Aug 2009
    Location
    Sydney
    Car:
    EU3, FN2R, S2K
    should be able to interchange a few mods with the ep3
    from what i know so far if yu got pre-facelift you should be able to interchange ep3 front bumper to the eu3
    same as seat rails and cluster
    ums for suspension i heard yu can use ep3 suspension and dc5 suspension but it needs to be shaved a bit.
    if yu for a facelift eu3
    yu should be able to use a oem facelift ep3 grille to put on the eu3
    tailights yu can not put it on cause their different
    and headlights im not 100% sure if yu can interchange it with the eu3
    side skirts wont fit cause ep3 sideskirts are apparently shorter
    and the rest im not to sure might have to go with oem honda parts
    Mr.PT

  3. #3
    Hello,

    Pretty much all mentioned above.

    If you have prefacelift, the front end of a EP3 should be direct swap. Headlights, i'm not sure of as EP3's came with standard HIDs and EU3's came with halogens. But front bumper, lip, foglights and grill should be directly interchangeable with 02-03 EU3. Not sure about rear bumper and lip. EP3/DC5 rear sway bar fits directly. DC5/EP3 suspension fits although you will need the tie rod ends from corresponding cars to make the swap viable at the front. Also, the rears will need to be shaved a tiny bit to make them fit. EP3 side skirts won't fit without modification, front lips are direct swap not sure about rear. EP3/DC5 steering wheel is direct swap. EP3 cluster should be direct swap. I took mine from the US 02 Civic Si as the redline is the same (6.8k) rather than EP3 (8.5k). Only let down is, the odometer runs in miles rather than kilometers. Header and downpipe can be taken from 01 - 05 civic sedan with D17z1. Exhaust will most likely need shortening as sedan is longer than hatch.

    Hope that helps.
    d e e p S i x [d6]™

  4. #4
    Member Array
    Join Date
    Jul 2007
    Location
    JDMD15B
    Car:
    14EGs/8EDs/3EKs
    Thanks heaps guys!

    I got a 01 EU3 though, does that make a difference ?

    I'm not sure if it's pre-facelift or facelift lol.

    By the way, what kind of bulbs do the headlights take ?
    JDM D15B - you wouldn't understand

    No K-SWAP ? No worries - Unfriend

  5. #5
    Member Array
    Join Date
    Aug 2009
    Location
    Sydney
    Car:
    EU3, FN2R, S2K
    Quote Originally Posted by tiksie View Post
    Thanks heaps guys!

    I got a 01 EU3 though, does that make a difference ?

    I'm not sure if it's pre-facelift or facelift lol.

    By the way, what kind of bulbs do the headlights take ?
    thats pre facelift
    headlights should be hb4
    Mr.PT

  6. #6
    The headlight bulb is H4.
    d e e p S i x [d6]™

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.