Page 842 of 1751 FirstFirst ... 3427427928328398408418428438448458528929421342 ... LastLast
Results 10,093 to 10,104 of 21004
  1. #10093
    Quote Originally Posted by curtis265 View Post
    Calm down Charlie Brown! If this shaped your internet then you shouldn't be on a car forum.

    it's been a lounge for quite some time now unfortunately. If you have technical questions they won't be ignored, don't worry about that.
    +1 to that.

  2. #10094
    Member Array
    Join Date
    Aug 2010
    Location
    Liverpool
    Car:
    Civic
    Quote Originally Posted by FallenAngel View Post
    are you after the lips that everyone has or the proper full on mugen type r kit?\

    Genuine mugen lips will cost you about 2300 from jdmyard just for the front side and rear.

    Not sure if you can get the genuine mugen type r kit.
    i asked, and they can get for 06-08,
    the 09+ has a facelifted bumper, and i cant find anywere =="

  3. #10095
    VOLTEX Array
    Join Date
    Dec 2007
    Location
    Melbourne
    Car:
    Bus Route 703
    ever thought about doing a preface lift conversion?
    Winton 1:37.76 Phillip Island 1:55.27

  4. #10096
    Member Array
    Join Date
    Aug 2007
    Location
    canberra
    Car:
    bmw
    said good bye to these today..

    BUT IF ANYONE NEEDS BRIDE RAILS LET ME KNOW!!


  5. #10097
    Newcomer Array
    Join Date
    May 2010
    Location
    Sydney
    Car:
    CIVIC FD1
    hey guys, Im looking to get an ipod/aux/bluetooth adapter for my 06 FD1.

    I need to know something though, by any chance does our OEM head unit have a CD changer harness plug at the back of it?
    I believe that the FD2 have CD stacker with their OEM head unit.

  6. #10098
    VOLTEX Array
    Join Date
    Dec 2007
    Location
    Melbourne
    Car:
    Bus Route 703
    no lol, the cd stacker you speak of is inbuilt
    Winton 1:37.76 Phillip Island 1:55.27

  7. #10099
    Newcomer Array
    Join Date
    May 2010
    Location
    Sydney
    Car:
    CIVIC FD1
    yeah I know that but I saw a DIY that had a harness plug at the back of it. here's the pics (note: its the white plug).
    The Adapter I'm planning to get requires this plug at the back of my OEM Head unit.
    So yeah Im just wondering if out FD1 has it.



  8. #10100
    VOLTEX Array
    Join Date
    Dec 2007
    Location
    Melbourne
    Car:
    Bus Route 703
    not sure about the vti cos they have a single stacker, could always check? not that hard to take apart the dash
    Winton 1:37.76 Phillip Island 1:55.27

  9. #10101
    Member Array
    Join Date
    Jan 2004
    Location
    sydney
    Car:
    seebik
    Masterpho

    this one might help you
    B3 = AUX SGND (ground for the signal)
    B4 = AUX SH GND (shielding ground for preventing the signal interference from other devices)
    B5 = AUX GND (AUX detection wire for switched type female jack)
    B13= AUX L (Left signal)
    B14 =AUX R (Right signal)
    B15 = AUX DET (AUX detection wire for switched type female jack)


    ghetto harness
    Connect a jumper to pins B5 and B15. Connect wires to B3, B13 and B14, these wires leads to the auxillary jack.



    if you want an oem look..you can order this to your dealer

    Last edited by fitme; 06-12-2010 at 08:33 AM.

  10. #10102
    Member Array
    Join Date
    May 2007
    Location
    Sydney
    Car:
    DC2R
    Quote Originally Posted by aznboiio1 View Post
    i asked, and they can get for 06-08,
    the 09+ has a facelifted bumper, and i cant find anywere =="
    I assume you have the facelift model then. Currently there are only the mugen lips for the facelifted version but i dont think anyone has brought them over yet.

  11. #10103
    Member Array
    Join Date
    Jul 2010
    Location
    Sydney
    Car:
    Civic Sedan
    Does anyone have a picture/ desciption of how to run their Amp power wire through their engine bay, I'm have a world of fun trying to get the power wire into the cabin from the engine bay.

    I've looked through 8th Gen and here and haven't found muchos.

    ej20i mentioned a hole, which I have found, above the clutch (my civic is manual) - but I'm wondering how the f to run the wire through the engine bay, and how to access that hole from the other side.

    Any help / links would be appreciated.
    Cheers

  12. #10104
    Member Array
    Join Date
    Jan 2004
    Location
    sydney
    Car:
    seebik
    ^ you run the cable inside the left fender (battery side) then look for the rubber grommet where the side indicator light harness goes inside the car, then punch a hole to run inside the car

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.