Cammed Motors Specs + DYNO Graph Mandatory

[joe.teg]

I find this very impressive for a b18c2,
good job.

Thanks man, its had a full port/polish, port matched and modified valves.
I have not done a quarter mile yet but i did run a 1.16.59 at wakefield with shit pedders shocks and springs, 17x7 rims on street tyres and a 22mm whiteline swaybar and the standard brake setup. im hoping to go back down there soon with my coilovers, new brake setup, 15in wheels and semis, camber kit and F7 LCAS. Ill be very curious to see how it goes then

[TODA AU]

Thanks man, its had a full port/polish, port matched and modified valves.
I have not done a quarter mile yet but i did run a 1.16.59 at wakefield with shit pedders shocks and springs, 17x7 rims on street tyres and a 22mm whiteline swaybar and the standard brake setup. im hoping to go back down there soon with my coilovers, new brake setup, 15in wheels and semis, camber kit and F7 LCAS. Ill be very curious to see how it goes then

What's the output in shoot4 @ less than 95% humidity?
Shoot8 has a 200 ramp rate & 120 inertia.
Shoot4 is a 100 ramp rate & 80 inertia.(& usually reads around 10-15kw less)
High humidity also adds a positive trim to the reading too.