Results 1 to 8 of 8
  1. #1
    Newcomer Array
    Join Date
    Oct 2010
    Location
    BNE
    Car:
    05 CL9

    Will these rims fit?

    Hey guys!

    keen on getting K's bbs lm but will they fit? The specs are 17x8 + 35 / 5x114.3

    My CL9 is stock atm but will put in BC N+ soon and maybe ingalls. Will they fit at stock and when I have it lowered? Will I need to roll guards?

    D

  2. #2
    Member Array
    Join Date
    Mar 2009
    Location
    Victoria
    Car:
    03 Euro Lux AT
    will fit, no need to roll guards unless you will be tucking tyre.. even then, you probs wont need it due to natural rear camber.
    3TripleZero
    S T A N C E | W O R K S

  3. #3
    Newcomer Array
    Join Date
    Jan 2009
    Location
    Brisbane
    Car:
    EK Civic VTi-R
    those specs will fit clean and easy. wont even need to roll guards unless you're planning to go superlow.

  4. #4
    Member Array
    Join Date
    Oct 2008
    Location
    Perth, WA
    Car:
    LEXUS GS300
    Quote Originally Posted by x10Hz View Post
    will fit, no need to roll guards unless you will be tucking tyre.. even then, you probs wont need it due to natural rear camber.
    what he said. 17x8 will be rather sunk. to get a nicer fitment try a 9" with a mid 30 offset.
    3TripleZero


    USDMyo

  5. #5
    Newcomer Array
    Join Date
    Oct 2010
    Location
    BNE
    Car:
    05 CL9
    awesome! yeah not planning to go superlow anyway

  6. #6
    Member Array
    Join Date
    Mar 2009
    Location
    Victoria
    Car:
    03 Euro Lux AT
    Quote Originally Posted by RiceMeister View Post
    what he said. 17x8 will be rather sunk. to get a nicer fitment try a 9" with a mid 30 offset.
    if u want flush at the fron 18x8 +38 is 100% flush
    3TripleZero
    S T A N C E | W O R K S

  7. #7
    Member Array
    Join Date
    Oct 2008
    Location
    Perth, WA
    Car:
    LEXUS GS300
    ^I was talking about rear. also depends how high/low you are OP, that will determine the flushness of the fitment due to camber ect.
    3TripleZero


    USDMyo

  8. #8
    Member Array
    Join Date
    Mar 2009
    Location
    Victoria
    Car:
    03 Euro Lux AT
    Quote Originally Posted by RiceMeister View Post
    ^I was talking about rear. also depends how high/low you are OP, that will determine the flushness of the fitment due to camber ect.
    rears will need high 20's offset to be flush based on heigh, front camber is minimal on lowering :P
    3TripleZero
    S T A N C E | W O R K S

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.