with a guard roll and some stretch + lows and natural camber you can fit them man!
most people go bitch fitment in aus, so step it up and try something unique run a 215/40/17 all round as well.
dudes have fit 18x9.5 +25 so a 9 +10 isn't impossible. it'll only sit out an extra 9mm from that and you'll have heaps more inner clearance to run some epic camber.
haha yeah was leaning towards that anyway. How many mm should I lower my buddyclubs (considering I will have rims around those specs in the future)
my current measurements are
Front: 100mm (body length from second spring perch to top of lower locking perch)
Rear 85mm (body length from second spring perch to top of lower locking perch)
This mean 0 finger gap at front and -1.5 finger cap at rear
Originally Posted by elitee
Think i found the perfect set
17X8 +5
17X9 +10
Offset too low !?!
they will fit tho you will need atleast -3/-4 camber at the front cos that will poke like a bitch and between -4/-6 at the rear. Ontop of that you will need a roll and pull all round + removing the fender liner. As a side note, if this car is ur daily i wouldnt run that hard.. you will go through tyres like condoms at a brothel..
Front: 100mm (body length from second spring perch to top of lower locking perch)
Rear 85mm (body length from second spring perch to top of lower locking perch)
This mean 0 finger gap at front and -1.5 finger cap at rear
they will fit tho you will need atleast -3/-4 camber at the front cos that will poke like a bitch and between -4/-6 at the rear. Ontop of that you will need a roll and pull all round + removing the fender liner. As a side note, if this car is ur daily i wouldnt run that hard.. you will go through tyres like condoms at a brothel..
thanks for the info...
Lucky it's not my daily only weekend car/
I guess we will see how long it last lol
Originally Posted by dee-y
maybe u can go reverse stagger style ?
run a 215/40/17 all round as well.
Bookmarks